|
|
Post by section31hq on Oct 25, 2017 0:36:19 GMT
I did something stupid when I first got my obd11 and messed with settings without backing them up. Now I have a "dead" (no communication) steering angle sensor (which shows twice on the list) and other flaky functionality. Any way to reconstruct the long code for the gateway if the original equipment list is available?
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 25, 2017 7:14:51 GMT
section31hq, If you go to your history option it will list all the changes you have made and it shows the before and after so you can change it back to how it started check out the history thread obdeleven.proboards.com/thread/97/history which may help you if you have not used it before and the long Coding thread obdeleven.proboards.com/thread/102/long-codingOr do you just want the list of modules in the gateway to be as it was on day one. |
|
|
|
Post by section31hq on Oct 25, 2017 23:38:10 GMT
Thanks for the links. I will look for the history and see if I can figure out what I messed up. It has an error that can not be cleared by obd11 (bad gateway coding) so I guess the list needs to be what it was originally. That will teach me to read the manual first. I've managed to make some mods to the lights and I'm happy with that, but I've noticed there is no communication with steering angle/assist and the AWD doesn't seem to be working like it used to (if at all) so I'm worried.
|
|
|
|
Post by section31hq on Oct 26, 2017 0:55:31 GMT
Thanks for the help! I found the original foulup and corrected it. Nice that OBD11 can copy the original long code in history and paste it on the messed up gateway. The error is gone! I'll see how the car behaves going to work tomorrow. Unfortunately the steering angle sensor seems to be dead (no communication). I'll troubleshoot that over the weekend.
Thank you again!
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Oct 26, 2017 7:01:56 GMT
glad we could help and yes i only just recently found out about the copy and paste long code function it does make life much easier to fix. Good luck with the angle sensor
|
|
