|
|
Post by paaudiman on Jul 12, 2024 4:45:25 GMT
Hello all. I have searched high and low for instructions how to do this. I bought a wrecked 2015 Audi A3 Cabriolet S Line with Prestige. The headlights were missing. Purchased set of Bi xenon Audi headlights. Installed them and getting errors about left and right power and module coded incorrectly. No high beams or turn signals on headlights. I’m tech savvy but new to obdeleven. Let me know what info is needed and I will provide. Thank you.
|
|
|
|
Post by dv52 (Australia) on Jul 12, 2024 5:09:00 GMT
Paul: Hi.
Firs, we need to know how this car was factory built and then we need to understand what EXACT equipment was retrofitted (I'm not sure how many "Bi xenon Audi headlights" are for sale, but it has to be lots!). And tell us where these headlights were purchased - so we understand if the modules have the correct datasets
We also need to understand the EXACT error messages (again, there are lots of different forms of "left and right power and module coded incorrectly"). And we need some words explaining why you chose these particular headlight fittings.
Finally, we need to understand how this car is coded - but for this we need to see copy of a SCAN for this car - so we know how the headlights are controlled
Don
|
|
