vwjan
New Member
Posts: 4
|
Post by vwjan on Jul 11, 2024 16:24:04 GMT
Can somone help with long coding and addaption. I don't have a history of it. When connected Obdeleven it showed then brake modul not coded. I have also Airbag error and sreering angle
OBDeleven data log
Date: 2024-07-09 22:45
VIN: 3VW2A7AU5FM014222 Car: Volkswagen Golf Year: 2015 Body type: 5-dr hatchback Engine: CRUA Mileage: 171348 KM
--------------------------------------------------------------- 03 Brakes
System description: ESC Software number: 5Q0907379K Software version: 0371 Hardware number: 5Q0907379F Hardware version: H31 Serial number: 51584000000321 ODX name: EV_Brake1UDSContiMK100ESP ODX version: 033001 Long coding: 000000000000000000000000000000000000000000000000000000000000
Trouble codes: U101300 - Control module not coded static Date: 2024-07-09 22:36:07 Priority: 2 Malfunction frequency counter: 1 Unlearning counter: 241 Freezeframes: 0007001852000000AF0000000000000000000000000000 C101754 - Longitudinal acceleration sensor No basic setting static C107954 - Lateral acceleration sensor No basic setting static C107A54 - Brake pressure sensor 1 No basic setting static B116854 - Steering angle sensor No basic setting static
|
|
|
Post by dv52 (Australia) on Jul 11, 2024 20:35:26 GMT
hmm....... How did the 03 module lose its long-code string - this doesn't happen magically? I have 2 x suggestions as to the way forward: First: Try the long-string values below - which are taken from vehicles that I found on my MQB platform database.
Note: these 3 x cars are "Yankee" model mk7s and they ALL have the following characteristics which are the same as this car:
- Model:Golf mk7 - North America Region (NAR) - not sure if this car is NAR?
- Engine: CRUA
- 03 Module:
- Software number: 5Q0907379K
- Software version: 0371
- Hardware number: 5Q0907379F
- Hardware version: H31
------------------------------------------------------------------------------ Address 03: ABS Brakes (J104) Part No SW: 5Q0 907 379 K HW: 5Q0 907 379 F Component: ESC H31 0371 Revision: 00000000 Serial number: 51794000000322 Coding: 01FA6AA12422096F007F020081C92580562490004081A4B200630050C002 ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Address 03: ABS Brakes (J104) Part No SW: 5Q0 907 379 K HW: 5Q0 907 379 F Component: ESC H31 0371 Revision: 00000000 Serial number: 51364000000864 Coding: 01FA6AA12421096E0080020681CB2580562490004081A4B200630050C002 ------------------------------------------------------------------------------- ------------------------------------------------------------------------------- Address 03: ABS Brakes (J104) Part No SW: 5Q0 907 379 K HW: 5Q0 907 379 F Component: ESC H31 0371 Revision: 00000000 Serial number: 52774000000143 Coding: 01FA6AA1242409720077020081CA2580562490004081A4B200630050C002 -------------------------------------------------------------------------- Second: Use a pay for service website HERE Note: I am not recommending this website - I'm simply making you aware of the service that the website provides.
Don
|
|
vwjan
New Member
Posts: 4
|
Post by vwjan on Jul 12, 2024 18:55:47 GMT
Thanks for help. Yes this is NAR car. Non of those 3 codes worked for me Just showing : function not avaiable. Is there posibility thst I am missing something in the app?
|
|
|
Post by dv52 (Australia) on Jul 12, 2024 23:13:25 GMT
vwjan : Of course, anything is possible - but "function not available" sounds like the long-code string is not being accepted by the module - rather than the long-code value not being correct. I'm not sure what process you used in attempting to force the new value into the module - but I suspect that you tried to change the long-code value, one-byte-at-a-time. From past discussions regarding this same problem with other forum members - I'm aware that one-byte-at-a-time does NOT work. This prohibition is NOT an OBD11 thing - the same restriction applies when using VCDS and VCP. AFAIK, there is no information in the public domain about this matter - but it seems that when these modules have a zero-sting, the long-code value can NOT be changed one-byte-at-a-time. My guess (emphasis on "guess") is that when long-code is a zero-string, the module goes into a state that is akin to when the module was first installed into the car on the factory assembly-line (i.e. when the module was first taken as stock from the factory warehouse).
Again, my guess is that the one-byte-at-a-time change facility in diagnostic devices like OBD11 only works when the module has an ACTIVE long-code string - being a non-zero string. I'm more than happy to be advised otherwise by a more informed forum colleague
So, my hunch is that you need to enter the entire long-code string - as a single value (i.e. as ONE change) for the module to accept the new setting. Personally, I have NOT made this change using OBD11. I use VCDS for this process (which I find more intuitive when replacing the entire module long-code string.
At the end of this reply, I include a copy of a 2017 instruction by whataboutthis /@deleted regarding OBD11's long-code facility. As you will read, it is ostensibly about how to restore a previous long-code string from OBD11's History record -but this situation has parallels with your case. So, hopefully it also applies!
The screenshots in the instruction use the Android option of OBD11 and the pictures apply to a now obsolete software version - I'm not sure if the iOS version OBD11 software also has this facility.
Don
Further Information to be added to this section. coding from history can be reverted by following this steps:1/ Go to History 2/ Select the History item with the long coding you wish to revert to and click on old value that you want to restore (the coding will be copied to clipboard) ![](http://preview.ibb.co/kRZEgk/3.png) 3/ go to Long coding and click on any byte of the coding (white box) at top of the screen ![](http://preview.ibb.co/nrdCZ5/2.png) 4/ From the options select paste coding and press OK ![](http://preview.ibb.co/gYeanQ/1.png) 5/ The changes will be highlighted in Green until you select the green tick box which will write the value ![](http://preview.ibb.co/fQNWu5/4.png)
|
|
|
Post by whataboutthis on Jul 13, 2024 13:22:25 GMT
Wow that's a very old post,
|
|
vwjan
New Member
Posts: 4
|
Post by vwjan on Jul 15, 2024 5:38:11 GMT
Coudn't find that way the code. Got lauch x431 with online cod ![]() ![]() ing. ![](https://i.ibb.co/QbnwtJ0/20240714-214644.jpg) Got a correct code and it was accepted. Now just looks like need to adjast basic settings.
|
|