davk
New Member
Posts: 3
|
Post by davk on Jun 25, 2024 23:41:59 GMT
For example in 5F what happened when I do soft or hard reset?
And what's the default on Control Units > Module: (5F) Multimedia.-"Change Service"
VW diagnostic mode?
|
|
|
Post by dv52 (Australia) on Jun 26, 2024 7:18:47 GMT
The quote below is from a deity on the OBD11 mother-ship: Reset function is used to reset control unit, it will send reset command after you press OK button. Ignition off/on reset is same as switch ignition off remove the key and switch it on. Hard reset is same as disconnect power from control unit. Soft reset is same as switch ignition off and wait until car goes to sleep. Not all units support all options of reset! This function is same as this: Sometimes it must be used on new UDS based control units after performing adaptations or codings. I.e. Golf MK7 BCM unit. Not sure that I understand your other questions!
Don
|
|