Post by nikod on Jun 24, 2024 12:03:50 GMT
Hi!
I installed front fog OEM lights in my Golf 7.5 2020 VIN (LP), everything according to the instructions, I coded:
Light bulbs coding:
[09], -> [Adaptation channels]
(1)-Leuchte12NL LB45-Lasttyp 12,10 - allgemeine Scheinwerfer
(2)-Leuchte12NL LB45-Lampendefektbitposition 12,38
(3)-Leuchte12NL LB45-Fehlerort mittleres Byte DTC-DFCC 12,22
(4)-Leuchte12NL LB45-Lichtfunktion A 12,Nebellicht links
(5)-Leuchte12NL LB45-Lichtfunktion B 12,Abbiegelicht links
(6)-Leuchte12NL LB45-Dimmwert AB 12,100
(1)-Leuchte13NL RB5-Lasttyp 13,10 - allgemeine Scheinwerfer
(2)-Leuchte13NL RB5-Lampendefektbitposition 13,42
(3)-Leuchte13NL RB5-Fehlerort mittleres Byte DTC-DFCC 13,23
(4)-Leuchte13NL RB5-Lichtfunktion A 13,Nebellicht rechts
(5)-Leuchte13NL RB5-Lichtfunktion B 13,Abbiegelicht rechts
(6)-Leuchte13NL RB5-Dimmwert AB 13,100Unfortunately, there is still coding in the manual :
1. Apply new switch:
Long coding helper, Byte 7, Bit 3:
But my BCM does not support coding (5Q0 937 086 CE), the switch does not respond when I choose to turn on the fog lights, the lights are on all the time along with the low beam in auto mode.
I entered measurement values [IDE05742]_Light switch position and with the value Fog lights I have the result (Not coded / not installed)
Have any of you fitted a new light switch to this BCM version?