|
0.83.0
May 29, 2024 6:23:34 GMT
Post by Justinas on May 29, 2024 6:23:34 GMT
Use the following format to report bugsDescription of bug: your bug descriptionAndroid software version: your android version Phone: your android phone modelDongle variant: Firstgen or Nextgen Car: your vehicle brand, model and year App profile: your app user email or username Changelog
v0.83.0
- Improved connection to all control units on Audi 2024 models
|
|
|
0.83.0
Jun 2, 2024 9:06:57 GMT
Post by whataboutthis on Jun 2, 2024 9:06:57 GMT
Just to update this from support info and other post by you on this site.
UPDATE: Manual coding currently will not work (including some One-Click Apps) on the control units that has SFD protection. Full scan is now possible on all control units, coding is possible on control units that does not have SFD protection.
List of control unit that the coding most likely will not work for now:
01 - Engine electronics 15 - Airbag 19 - Diagnostic interface for data bus 46 - Comfort system 5F - information electronics 1 75 - emergency call module and communication unit
Cars that has these control units:
Audi A4 2024- Audi A5 2024- Audi A6 2024- Audi A7 2024- Audi Q7 2023- Audi Q8 2023- Audi Q8 e-tron 2024- Audi e-tron GT 2024-
|
|
milap
New Member
Posts: 2
|
0.83.0
Jun 3, 2024 12:58:27 GMT
Post by milap on Jun 3, 2024 12:58:27 GMT
Description of bug:
Cannot execute: "Control Units > Lane Change Assistant (3C) > Basic Settings > Resetting of all adaptation values" Getting error: "Something went wrong. Try again" I want to reset dynamic calibration angle values (after retrofit from other car Skoda Superb 3V), and restart procedure.
"Control Units > Lane Change Assistant (3C) > Basic Settings > Resetting of all adaptations" seems to work (I am not getting error) This command, from I have found out, only resets number of dynamic calibrations counter
I have read on other forums that someone was able to commit that command through VCDS (same radars) and, same as me, had a problem using OBDeleven
In VCDS those commands are called similar: IDE00498-Resetting of all adaptation values IDE01475-Resetting of all adaptations
Radars: 2q0907686B & 2q0907685B (SW: 0149, HW: H06)
Android software version: 13 Phone: Samsung S20 FE Dongle variant: Nextgen
Car: Skoda Kodiaq 2019 App profile: MiLAP
|
|
|
0.83.0
Jun 6, 2024 22:46:27 GMT
Post by whataboutthis on Jun 6, 2024 22:46:27 GMT
Description of bug: OBD11 has improved the power of my car, did a track day today and did some recording of live data on charts so I can update my Live Data Spreadsheets, But OBD11 Showed under Control unit 01 - Vehicle speed my car came into the pits and stopped so speed was correctly shown as 0 then it accelerated in under a second to 255 KPH and then back to zero. Obviously I blacked out under the acceleration and deceleration but wondered why or how this figure was arrived at. Android software version: 13 Phone: TCL Dongle variant: Nextgen Car: Seat Cupra 280 App profile: cupra280.co.uk
UPDATE:
As I don't see any answers posted in this section I have left the issue to warn other users. Raised the issue via the on app help function with narrative LIVE DATA ISSUE and got the following response. The AI Robot has pointed me correctly at the UDS and NON UDS Live data help files however the wording ""The descriptions of live data are provided by other users, so there is a chance that that information is inaccurate"." is inaccurate and should in my opinion read "The descriptions of live data for non UDS Control units may be provided by other users, so there is a chance that that information is inaccurate". The Robot did not have the information so the warning is relevant but can lead to missunderstanding.
|
|
milap
New Member
Posts: 2
|
0.83.0
Jun 13, 2024 9:01:41 GMT
Post by milap on Jun 13, 2024 9:01:41 GMT
|
|
|
0.83.0
Jun 14, 2024 7:59:14 GMT
Post by Justinas on Jun 14, 2024 7:59:14 GMT
Thank you for your feedback. I have forwarded it to the responsible people
|
|