|
Post by margii on May 26, 2024 7:27:54 GMT
Hi, I have been having trouble with adaptation in this module for some time. Previously, I could perform adaptations or long coding without any problems. But now despite SFD unlock it shows up every time the message "Something went wrong.Try again" appears in red😟🤬😟 I try everything: Engine hood open/closed Brake applied/released Connect to wifi / without connection to wifi With Skoda account / without Skoda account
I other modules with SFD protection everything is working perfectly.
I'm also update software of unit to lastest version.
I once managed to adapt one of the connections to the car and the problem came back. Has anyone had such a problem and know how to solve it?
|
|
|
Post by stefflimitless on Jun 1, 2024 5:47:11 GMT
You have iOS App?
|
|
|
Post by margii on Jun 3, 2024 14:30:33 GMT
No I have Android and I find a solution for this problem. First I have to run the usual OBD11. OBD11 scan all modules and then run OBD11 for Vag and everything works as it should. I leave it for others if they have a problem
|
|
|
Post by spike2704 on Jul 13, 2024 21:54:23 GMT
I have this problem with Stg.9. I can unlock Sfd on other control units but Stg 9 will not unlock. Does anyone have a tip?
|
|