|
|
Post by audroad on May 22, 2024 16:41:51 GMT
Is this possible with this coding instructions?
I DON'T TEST IT YET
Make sure the hood of the car is opened.
Turn on the car, but not the engine
Connect to OBDEleven
Under the Control Units > Module: (5F) Multimedia.
select the "Change Service" and select "VW
diagnostic mode".
Then select Adaption and change the follow below:
nhtsa_properties
I switched everything that was "activate" to "Not
activated"
Locked menu contents
I switched everything that was "activate" to "Not
activated"
Once completed, hold down the Volume button (not the one on the steering wheel) until the MMI restarts. Now you can enjoy VIM.
|
|
|
|
Post by binaudi on May 22, 2024 20:57:19 GMT
Looking to achieve this as well but on my Audi A7. Would this work you think? I have a post but no replies. It's been very difficult finding out to do it without using the One-click apps. My post: Post |
|
|
|
Post by audroad on May 23, 2024 22:09:24 GMT
Looking to achieve this as well but on my Audi A7. Would this work you think? I have a post but no replies. It's been very difficult finding out to do it without using the One-click apps. My post: PostI don't know. Maybe someone on this forum can help us. |
|
|
|
Post by audroad on Jun 11, 2024 17:35:29 GMT
Is this possible with this coding instructions?
I DON'T TEST IT YET
Make sure the hood of the car is opened.
Turn on the car, but not the engine
Connect to OBDEleven
Under the Control Units > Module: (5F) Multimedia.
select the "Change Service" and select "VW
diagnostic mode".
Then select Adaption and change the follow below:
nhtsa_properties
I switched everything that was "activate" to "Not
activated"
Locked menu contents
I switched everything that was "activate" to "Not
activated"
Once completed, hold down the Volume button (not the one on the steering wheel) until the MMI restarts. Now you can enjoy VIM.
it is safe to apply? I don't test yet. |
|
|
|
Post by gabrielepreziosa on Jun 11, 2024 17:37:08 GMT
Is this possible with this coding instructions?
I DON'T TEST IT YET
Make sure the hood of the car is opened.
Turn on the car, but not the engine
Connect to OBDEleven
Under the Control Units > Module: (5F) Multimedia.
select the "Change Service" and select "VW
diagnostic mode".
Then select Adaption and change the follow below:
nhtsa_properties
I switched everything that was "activate" to "Not
activated"
Locked menu contents
I switched everything that was "activate" to "Not
activated"
Once completed, hold down the Volume button (not the one on the steering wheel) until the MMI restarts. Now you can enjoy VIM.
it is safe to apply? I don't test yet. I don't know, i wont try this coding. |
|
