|
Post by david8904 on May 21, 2024 19:04:46 GMT
Hello, I am in the process of changing the 5F unit from mib1 to mib2 The old unit is: 5F0 035 846 A The new unit is: 5QA 035 824 I can do it component proctect without any problem. However, I am afraid of sound problems: There is a subwoofer in the car - subwoofer control in the old unit is available in the unit menu. Unfortunately, the new unit does not have subwoofer control. I'm guessing that the new unit (MIB2) comes from a car with a standard audio system, but the car I want to install this unit in has a subwoofer, so it probably has a Seat Sound System or Beats. How to code/configure it correctly? I have a written long encoding string and an adaptation map. Unfortunately, I don't know the details of the long coding of the new and old units. I also have vcp - there is a zdc file for the new unit but it is not mentioned that it is for seat sound system or beats audio. Please help.
|
|
|
Post by przebiegly on May 22, 2024 5:36:47 GMT
check if you have amplifier under the driver seat - if yes you have beats audio system otherwise seat sound system another method check subwoofer wiring (4 > beats 2 > SSS)
|
|