tek
New Member
Posts: 3
|
Post by tek on May 20, 2024 10:32:27 GMT
Not having much luck with this. steps are: - battery charger on - doors closed - ignition on - cycle EPB - plug in OBDeleven - connect in VAG app - go to control units -> brakes (the '03' is red?) -> basic settings -> start lining change mode I can click on "start lining change mode" all day, nothing happens. If I click on "routine control options" it asks me for a two-digit hex number. What am I doing wrong?
thanks,
...tom
Attachments:
|
|
|
|
Post by dolcehenke on May 21, 2024 7:41:21 GMT
Have you pressed on the green Button? You have to press like 2 sec
|
|
tek
New Member
Posts: 3
|
Post by tek on May 21, 2024 10:31:00 GMT
I'll try that today if I get a chance thanks! ...tom
|
|
tek
New Member
Posts: 3
|
Post by tek on May 21, 2024 12:37:10 GMT
That was indeed it! all set to do a brake job now  |
|
|
|
Post by onsuaj on Jul 1, 2024 6:58:27 GMT
Hi, i modified the pads on my audi a6, i opened the parking brake and released the piston manually, now i hold getting parki g brake fault on sprint. Any thoughts why? Tutuapp 9Apps |
|
