|
Post by robydella on May 15, 2024 13:25:54 GMT
It is possible activate with OBD in the A3 8y virtual cockpit the oil temperature and boost like that s3 and rs3? Thanks. ![dashboard](https://ae01.alicdn.com/kf/S7157453e05d34000b72ea05feae5f1dfF.jpg_640x640q90.jpg)
|
|
|
Post by millsey79 on May 15, 2024 14:17:56 GMT
To have the boost gauge I think you need to change the vehicle variant to an RS3 derivative.
I changed to derivative 27 and I now have an RS3 on display in my virtual cockpit and a boost gauge.
Control module 17, dashboard Long coding Vehicle variant
|
|
|
Post by robydella on May 15, 2024 15:31:50 GMT
Update: it’s work, thx
With the vehicle variant 27 the screen show RS logo when you enter in the car and stop the car For show the audi logo like before but maintaining the boost and oil temperature you have to select the vehicle variant 26
|
|
|
Post by audroad on May 15, 2024 21:47:17 GMT
It is valid with a basic/standar cockpit?
|
|
|
Post by robydella on May 16, 2024 7:17:23 GMT
You must have virtual cockpit plus
|
|
|
Post by audroad on May 16, 2024 8:27:52 GMT
And can i get Sport View with this basic cockpit?
|
|
|
Post by victorerik13 on May 22, 2024 9:24:27 GMT
Unfortunately it doesn't work for my A3 45 TFSIe software version 3843 Virtual Cockpit Plus
|
|
|
Post by hawless on Jun 6, 2024 16:21:14 GMT
I have made this coding, i get the rs sport entry part but i do not see the round dials for power and torque. Is theere something i am missing ?
In the virtual cockpit settings for s performance display i got a new check for automatic rs style, if that helps figure stuff out
|
|
|
Post by millsey79 on Jun 6, 2024 17:13:45 GMT
You need to select this option in the s performance layout configuration. I think its called engine data, just select this and it should be displayed
|
|
|
Post by hawless on Jun 7, 2024 6:40:03 GMT
I assume you are referring to this one ? ![](https://i.ibb.co/HC8H2Ny/pic1.jpg) Its checked and still, normal display when s performance layout is selected ![](https://i.ibb.co/rsv5M6h/layout1.jpg) I have noticed that in Long coding i do not have Engine display data set to Yes and neither Acceleration display. Also in adaptation under configurable display settings i have a lot of stuff set to not visible. ![](https://i.ibb.co/BGGjZkt/adapt1.jpg) This is my info on the 5F module ![](https://i.ibb.co/WgTTP5x/swnr.jpg)
|
|
|
Post by millsey79 on Jun 7, 2024 9:39:40 GMT
Yes select Addition display - display mode and look for power unti data. If this option has been selected the power and torque data will appear.
|
|
|
Post by hawless on Jun 7, 2024 10:26:39 GMT
Under additional display i do not have this option. I believe i need to code something more
|
|
|
Post by millsey79 on Jun 7, 2024 12:45:19 GMT
Try this
Module 17 - dashboard Long coding Engine data display Change from no to yes
Then reset your MMI
|
|
|
Post by hawless on Jun 7, 2024 16:05:46 GMT
It worked, thanks. Any ideea how i can get oil and transmission temp gauges , also gforces display to work ?
|
|
|
Post by victorerik13 on Jun 9, 2024 13:54:59 GMT
Anyone who can explain me step by step how to activate the RS layout/S Performance layout? A3 Y8 45 TFSIe
|
|
|
Post by alo0sh on Aug 27, 2024 13:41:28 GMT
Can the S-Performance layout also be activated on an Audi A3 8Y? Attached is an example image
Thx
|
|
|
Post by alo0sh on Aug 27, 2024 13:42:44 GMT
It worked, thanks. Any ideea how i can get oil and transmission temp gauges , also gforces display to work ? Can you help me, please?
|
|