|
Post by tonashi on May 13, 2024 18:40:02 GMT
Čaute. I don't know why my OBDeleven doesn't want to connect to the 5F module. Everything worked fine .. now when I want to load 5F it says: "the control unit is not responding. Try again later". Please, does anyone have an idea what I should check?
|
|
|
Post by dv52 (Australia) on May 13, 2024 22:08:51 GMT
tonashi : hmm............ not enough information provided t understand why you can't connect! I assume that you are using IOEF (Ignition-ON, Engine-OFF). I also assume that you have a PRO account.
Maybe try asking the Gateway module to talk to the 5F module in diagnostic mode - meaning create a SCAN and see if the 5F module is correctly responding to the Gateway's pinging request?
Don
|
|