omrij
New Member
Posts: 1
|
Post by omrij on May 11, 2024 10:21:57 GMT
Hi I have new Skoda superb (2024 - probably manufactured in 2023) It has lane assist, parking assist, acc, front/rear/side/maneuver assist But it doesn't have traffic jam assist and adaptive lane guidance (although the button on the wheel exist but does nothing).
I don't really understand how to enable this two functions, what device/pack do I need. Do I just "click" to enable? Or do I have to code something?
Any help would be appreciated.
|
|
rad1o
New Member
Posts: 6
|
Post by rad1o on Jun 12, 2024 11:35:34 GMT
I have a 2023 SIII which does not have Traffic Assist. I activated Traffic Jam Assist. It works when I activate ACC and slows down and restarts in stop and go traffic. If the stop is too long you may have to press the accelerator pedal.
I used the long coding. In the instructions they also gave the proper coding.
Coding Stg 13 Long Coding - Traffic jam dependent linear tracking -> act , Byte 1 Bit 3 act
Assistant for traffic hold up -> act , Byte 1 Bit 4 act
Autodriveaway by pretrigger -> act , Byte 2 Bit 0 act
Autodriveaway after short stop -> act , Byte 2 Bit 1 act
Driveaway by triggerleaver -> act , Byte 2 Bit 2
Curve Assistant -> act , Byte 2 Bit 4 Caused an error message, so I reverted to not activated
Traffic jam assistant in car menu -> act , Byte 3 Bit 5 I do not see the TJA in the car menu
Dense Traffic -> act , Byte 4 Bit 7
Stg A5 Sec Access 20103 if required Long Coding
STA -> act , Byte 16 Bit 5
Stg 5F Adaptations
vehicle Fct list BAP Expansion front traffic Assist 0x41 -> act Expansion front traffic Assist 0x41 msg bus -> Terminal 15 These two were already activated and set in my menu.
|
|