|
|
Post by danyaero on Apr 29, 2024 12:28:04 GMT
Hi, I’d like to ask if it’s possible to fully reset/relearn the positions for the windows using OBD11.
My issue is that the front passenger window in my car never fully closes. I’ve reset the comfort opening/closing long pressing the open/close windows, but does not solve the issue.
|
|
|
|
Post by stefflimitless on Apr 30, 2024 19:35:07 GMT
It‘s in 09 Basic settings.
For manually: Let pressed down the button until the window is fully down. Release and press down again until you here the click.
Then let pulled up the button until the window is fully up. Pull again and you will hear the click again. This is actually how to enable the automatic function (fully pulled or pressed single), when it sometimes not work.
|
|
|
|
Post by danyaero on Apr 30, 2024 19:41:55 GMT
It‘s in 09 Basic settings. Hi! Thanks for the reply! Could you elaborate a bit more on how the procedure is from module 09? I’ve never done these kind of settings before tbh. Yes! I tried the manual reset from the control panel on the car but yet again, confort open/close works just the window not going all the way up. I also tried to clean up any debris and put some liquid silicone too, but no luck. |
|
|
|
Post by stefflimitless on Apr 30, 2024 19:44:14 GMT
Just enter Basic settings, there are all window positions given. Just perform it.
|
|
|
|
Post by danyaero on Apr 30, 2024 19:48:20 GMT
Just enter Basic settings, there are all window positions given. Just perform it. Any specific one from the list? share.icloud.com/photos/0abMNfftwtBjWBAlCo6Mu_zEgI imagine that it should be regarding the window I want to reset, but don’t know which other option I should choose: Adapt Reset Or the one that just mentions the window |
|
|
|
Post by stefflimitless on May 1, 2024 5:45:57 GMT
I would reset it. Afterwards try it manually. If not works then do adaptation.
|
|
|
|
Post by danyaero on May 1, 2024 13:21:29 GMT
I would reset it. Afterwards try it manually. If not works then do adaptation. Thank you I’ll give it a go to see if it works! Thanks for the insight! |
|
