Post by dduanee96 on Apr 27, 2024 22:09:54 GMT
Hi everyone.
A few months ago I was in a minor accident and the car alignment was messed up. It has since been re aligned.
The issue I'm having is that at that time the acc became unavailable and the only dtc at the time was saying that the sensor is out of alignment. The live data from the module showed that it was about 3.5 degrees out of alignment at the time but one corner of the sensor had come off the grommet that holds it in place so i clipped it back on and the alignment reading slowly came down to about 2.6 degrees after driving on the highway following another car. So I ordered one of those hex tools to adjust the alignment screws on the sensor. When the tool arrived around a week later I went back to the live data to be able to see the current alignment before making any adjustment to the alignment screws but now there was a 00003 sensor faulty code, and the alignment reported in the live data is now just stuck at 2.9 degrees and does not change regardless of any adjustments made. I am looking for some help to try to clear the code as it wont clear when i try to do so. I also tried to reset the alignment angle following this video but I'm using a first gen device and I don't have these same options in basic settings that the video showed. Below is a printout of the datalog from the module.
Car: Audi A4
Year: 2014
13 Adaptive Cruise Control
System description: ACC3
Software number: 8K0907561B
Software version: 0100
Hardware number: 8K0907561B
Hardware version: H11
Serial number: 00000000000000
Long coding: 00F2C4
Trouble codes:
00003 - Control module Faulty
static
Priority: 1
Frequency counter: 1
Driving cycle: 255
00234 - Sensor for adaptive cruise control misadjusted
static
Priority: 2
Frequency counter: 1
Driving cycle: 148
Mileage: 95337 km
Date: 2024-02-17 15:34:20
I would really appreciate if someone had any ideas as to what the issue is and how i could fix it. Thanks
A few months ago I was in a minor accident and the car alignment was messed up. It has since been re aligned.
The issue I'm having is that at that time the acc became unavailable and the only dtc at the time was saying that the sensor is out of alignment. The live data from the module showed that it was about 3.5 degrees out of alignment at the time but one corner of the sensor had come off the grommet that holds it in place so i clipped it back on and the alignment reading slowly came down to about 2.6 degrees after driving on the highway following another car. So I ordered one of those hex tools to adjust the alignment screws on the sensor. When the tool arrived around a week later I went back to the live data to be able to see the current alignment before making any adjustment to the alignment screws but now there was a 00003 sensor faulty code, and the alignment reported in the live data is now just stuck at 2.9 degrees and does not change regardless of any adjustments made. I am looking for some help to try to clear the code as it wont clear when i try to do so. I also tried to reset the alignment angle following this video but I'm using a first gen device and I don't have these same options in basic settings that the video showed. Below is a printout of the datalog from the module.
Car: Audi A4
Year: 2014
13 Adaptive Cruise Control
System description: ACC3
Software number: 8K0907561B
Software version: 0100
Hardware number: 8K0907561B
Hardware version: H11
Serial number: 00000000000000
Long coding: 00F2C4
Trouble codes:
00003 - Control module Faulty
static
Priority: 1
Frequency counter: 1
Driving cycle: 255
00234 - Sensor for adaptive cruise control misadjusted
static
Priority: 2
Frequency counter: 1
Driving cycle: 148
Mileage: 95337 km
Date: 2024-02-17 15:34:20
I would really appreciate if someone had any ideas as to what the issue is and how i could fix it. Thanks