gnoli
New Member
Posts: 3
|
Post by gnoli on Apr 19, 2024 17:27:40 GMT
I want to program leuchte with OBD11, everywhere on the forum I read about how it should be done but I can’t manage to find it in the app. When I open adaptation in my Central Electronics it shows me channels from 0-255, no leuchte channels.
Car: Golf 6, 2009 Using the OBD11 mobile app in iOS
How should this be done?
I just want to program out my bulb out error for my rear fog light and when the light switch is in AUTO mode, I want my DRLs to be constantly on. It doesn’t sound hard but I’ve be plucking each single hair on my head to just get it to work.
|
|
|
Post by dv52 (Australia) on Apr 19, 2024 21:19:05 GMT
gnoli : "Leuchte-programming" is ONLY applicable to the MQB platform version of the Golf - which is the mk7, mk7.5 and Mk8. These model Golfs have modules that are based on the newer UDS/ODX protocols
Your mk6 is built on a PQ35 platform - so it's too old!!
I'm certainly NOT an expert on PQ35 Golfs - but AFAIK, the lighting changes that you want involve the dreaded Byte 18 - which should NOT be changed because once you mess with Byte18, it's extremely difficult to return back (again, AFAIK)
Don
|
|
|
Post by refikbasket on Sept 16, 2024 11:55:10 GMT
how did you solve it?
|
|