|
|
Post by mikemigk on Apr 16, 2024 5:30:35 GMT
Hello guys My name is Mike migk. . I search to many hours at Google but couldn’t find anything to resolve my problem.
I have an Audi q2 purchase 11/21 .
It has only speed limit and after lot research I see has the hardware -radar to accept acc .
So I find a guy and he make the code and add acc. I change stalk and after that he make the coding.
The acc works great , the radar read distance and all .
The problem is that at cluster can’t see the speed and distance at all .
I have speed limit too on. When choose speed limit I can see the speed at cluster
When I choose acc nothing shows. The acc works I see it on the road but can’t see speed and distance.
I have vas 5054 .
Can anyone pls help me ?
Pls if y know anything pls help me , road acc with blind speed and distance
Thanks for any answer thanks
If anyone need help can sent me at telegram I will help . If want add acc
Audi q2
|
|
|
|
Post by dv52 (Australia) on Apr 16, 2024 21:40:08 GMT
Mike: Hi and thanks for the Private Message - but as I request in the signature part of ALL my posts, questions about car-repair properly belong in the forum (not in Private Message)! Hence my response here!!
As for this car - other than it being an MY21 Audi Q2- nothing else is known. So, we don't know how this car was built, what additional equipment was installed into the vehicle as part of the ACC retrofit, or how the modules are coded. As you will appreciate - ain't nothing that can be done on a forum without this basic information!
Because you have posted your request here I assume that you have an active OBD11 account. If so, please post-up a FULL , unedited SCAN for this vehicle, so we can see how it was built and how it is coded. To be clear, "unedited" means NO changes and you need to enable Freeze-frame against your OBD11 account before creating the SCAN report.
Don
|
|
|
|
Post by mikemigk on May 6, 2024 14:21:29 GMT
First sorry for my mistake sent private message.
Thanks for what to do for help me.
One question freeze frame is same with full back up?
Yes I have obd11 pro plan.
I will search at Google how I can make a freeze frame and sent one gere. Ok
|
|
|
|
Post by DieterG on May 7, 2024 11:14:28 GMT
|
|
|
|
Post by mikemigk on Sept 21, 2024 11:13:23 GMT
Hello guys . Sorry for the delay.
That is full scanp
|
|
|
|
Post by dv52 (Australia) on Sept 22, 2024 21:58:17 GMT
OK - it appears that your Gateway module has detected "additional installation" which are not correctly registered in the Gateway Installation List. I have no idea why this error has occurred - but I suggest that you read the forum posts related to AUTOCODE - HERE
Also, I'm concerned about the Component Protection errors on this car - I suspect that it's because you have retrofitted a hacked MIB/MMI!
Don
|
|
|
|
Post by mikemigk on Sept 23, 2024 0:54:04 GMT
Yes mmi unit i buy it from ebay. After i learn for coloonet protective etc. i patch it couse i paid lot and works fine
The acc retrofit i made it remotely. The guy has geko acc etc and he make it to activate it . I just buy used instrumed cluster and works fine.
The problem is i try to find a way to see the speed for acc at my dashboard . On lcd . When i choose speed limit i show it fine , when i choose acc nowhere see current speed .
What need to do?
Red fault i have only at 5f and is for ccomponet protective
The other U112400 is for reverse camera . I bought it from ali express plug and play. The guy dont kjow how make works and that .
So the faults is for that
How i can resolve my problem with acc? At cluster i cant see the speed . Any speed, current speed , value speed . Mothing
I can see speed only when i choose speed limit.
Can help anyone ?
|
|
