|
|
Post by momo94tn on Mar 27, 2024 16:33:27 GMT
Hi, i have golf 7 2013 2.0 TDI I'm from Italy . I get aftermarket headlights from AOKEDING whit canbus, previously i used alogen original headlights, now whit this aftermarket headlights whit canbus the left side working perfectly, the right side one of two DRL on right side don't working, i get this error whit obdeleven:
Log dei dati OBDeleven
Data: 2024-03-27 17:29
NIV: WVWZZZAUZEW084758
Veicolo: Volkswagen Golf
Anno: 2014
Tipo di carrozzeria: 5-dr hatchback
Motore: CRBC
Chilometraggio: 122812 KM
---------------------------------------------------------------
09 Centrale elettrica/elettronica
Descrizione sistema: BCM MQBAB M
Numero software: 5Q0937084S
Versione software: 0112
Numero Hardware: 5Q0937084S
Versione Hardware: H14
Numero seriale: 00011321800387
Nome ODX: EV_BCMCONTI
Versione ODX: 011001
Codifica completa: 00000842C24102FB4BE4400000040308100A000000000000000000000000
Sottosistemi:
Descrizione sistema: WWS 130727
Versione software: 0551
Versione Hardware: 042
Numero seriale: 130807161318
Codifica completa: 0E4DDD
Descrizione sistema: RLFS
Versione software: 0042
Versione Hardware: 024
Numero seriale: Y13M08D08H00M32S49S1
Codifica completa: 00A8DD
Codici guasto:
B12EB15 - Lampadina luce diurna e di posizione faro dx Interr./c.c. su posit.
statico
Date: 2024-03-26 22:52:41
Mileage: 122783 km
Priorità: 2
Contatore frequenza guasti: 1
Contatore di apprendimento: 254
Stato morsetto 15: ON
Stato morsetto 50: OFF
Tensione: 12.3 V
Temperatura esterna: 7.5 °C
Status Bremslichtschalter (HW): OFF
Status Bremslichtschalter (CAN): OFF
OFF: Azionato
Luci di posizione: non azionato
Gestione automatizzata delle luci: non azionato
Anabbaglianti: non azionato
Luci di parcheggio sin.: non azionato
Luci di parcheggio des.: non azionato
Letzte Weckursache/ Werte [00;2E]: gültiges Funktelegramm
CAN-Bus_aktiv: ON
B136676 - Sensore di rilevamento pioggia e luminosità Posizionamento errato
Sporadico
Date: 2024-03-27 20:48:35
Mileage: 122783 km
Priorità: 2
Contatore frequenza guasti: 9
Contatore di apprendimento: 41
Stato morsetto 15: ON
Stato morsetto 50: OFF
Tensione: 14.5 V
Temperatura esterna: 7.0 °C
Status Bremslichtschalter (HW): OFF
Status Bremslichtschalter (CAN): OFF
OFF: non azionato
Luci di posizione: non azionato
Gestione automatizzata delle luci: non azionato
Anabbaglianti: Azionato
Luci di parcheggio sin.: non azionato
Luci di parcheggio des.: non azionato
Letzte Weckursache/ Werte [00;2E]: gültiges Funktelegramm
CAN-Bus_aktiv: ON
|
|
|
|
Post by dv52 (Australia) on Mar 27, 2024 21:10:48 GMT
I'm not sure that there is much that anyone on this forum can do about this issue. The problem is that your new headlights are non-OEM - meaning that the fittings that you installed are NOT VW parts. VW never designed and never sold LED headlights with a 10 x pin connector - ALL of their non-halogen headlights had 14 x pin connectors.
I'm also not sure about your claim that the AOKEDING headlights are "with canbus". If you installed these headlights WITHOUT making any wiring changes - they will NOT use the CANbus because the OEM 10 x pin headlight connector on the car does NOT have CANbus wires.
So, based entirely on your brief words - the fact that the headlight on one car-side is working OK suggests that this problem is NOT a coding issue. Also, the fact that "one of two DRL on right side don't working" strongly suggests there is a fault in the right-side headlight.
If you still don't believe my hypothesis - remove the right-side fitting and plug it into the left-side headlight connector on the car. If the fault still doesn't work - the fault is in the AOKEDING headlight.
Don
|
|
|
|
Post by momo94tn on Mar 27, 2024 22:22:05 GMT
I'm not sure that there is much that anyone on this forum can do about this issue. The problem is that your new headlights are non-OEM - meaning that the fittings that you installed are NOT VW parts. VW never designed and never sold LED headlights with a 10 x pin connector - ALL of their non-halogen headlights had 14 x pin connectors.
I'm also not sure about your claim that the AOKEDING headlights are "with canbus". If you installed these headlights WITHOUT making any wiring changes - they will NOT use the CANbus because the OEM 10 x pin headlight connector on the car does NOT have CANbus wires.
So, based entirely on your brief words - the fact that the headlight on one car-side is working OK suggests that this problem is NOT a coding issue. Also, the fact that "one of two DRL on right side don't working" strongly suggests there is a fault in the right-side headlight.
If you still don't believe my hypothesis - remove the right-side fitting and plug it into the left-side headlight connector on the car. If the fault still doesn't work - the fault is in the AOKEDING headlight.
Don
Hi friend from Australia, thank you very much for your helpfulness you are always kind in answering, I think they are with canbus since pa my golf has halogen headlights originally so I don't understand how the new LEDs can work without coding  I also think they are a factory defect because by the way on the right one we get water unfortunately. That said, I will check with the left headlight wires, I also have the light/rain sensor that doesn't work, I'm waiting for the part to arrive. I wanted to point out one thing: when the switch is turned to 0 i.e. all the lights are off, the drl of the left headlight are on anyway , on the right one they are totally off, if I turn to "auto" they work both right and left but the second drl of the right headlight does not work, putting the switch on the last one i.e. low beam and drl on , the same thing so one drl doesn't work while if I put only on position lights all drl work except the second one on the top right so my doubt was that maybe something should be activated because if I put on the four emergency turn signals the drl all work coloring in amber ... |
|
|
|
Post by dv52 (Australia) on Mar 28, 2024 20:35:23 GMT
I think they are with canbus since pa my golf has halogen headlights originally OK - if you say so!! I'm not trying to convince you that halogen headlights on MQB platform cars do NOT use CANbus - I'm very comfortable for you to believe otherwise!!
However, I suggest that you read the wiring diagrams for your Halogen lights. If you find ANY CAN wires for the Halogen headlight 10 X pin connector in the VW material, please post-up a copy of the wiring diagram (I'm always willing to learn)!! so I don't understand how the new LEDs can work without coding As I said in my first rely - this retrofit is very non-OEM. If you had installed authentic VW LED headlights, you would have needed to make coding changes (and also wiring changes - you would have needed to install 14 x pin connectors onto the factory loom). The AOKEDING headlights however have 10 x pin headlight connectors - so these non-OEM headlights are designed to use the halogen coding on the central electrics module to operate LED lamps!
Again, very non-OEM!!! ................ the right one we get water unfortunately. New information - not provided in your original post!! More evidence that the right fitting is faulty I also have the light/rain sensor that doesn't work, I'm waiting for the part to arrive. Again - new information - not provided in your original post !! I wanted to point out one thing: when the switch is turned to 0 i.e. all the lights are off, the drl of the left headlight are on anyway , on the right one they are totally off, if I turn to "auto" they work both right and left but the second drl of the right headlight does not work, putting the switch on the last one i.e. low beam and drl on , the same thing so one drl doesn't work while if I put only on position lights all drl work except the second one on the top right so my doubt was that maybe something should be activated because if I put on the four emergency turn signals the drl all work coloring in amber ... Not surprising - given that this car has a faulty rain-light sensor!!! |
|
|
|
Post by momo94tn on Apr 4, 2024 0:35:26 GMT
I think they are with canbus since pa my golf has halogen headlights originally OK - if you say so!! I'm not trying to convince you that halogen headlights on MQB platform cars do NOT use CANbus - I'm very comfortable for you to believe otherwise!!
However, I suggest that you read the wiring diagrams for your Halogen lights. If you find ANY CAN wires for the Halogen headlight 10 X pin connector in the VW material, please post-up a copy of the wiring diagram (I'm always willing to learn)!! so I don't understand how the new LEDs can work without coding As I said in my first rely - this retrofit is very non-OEM. If you had installed authentic VW LED headlights, you would have needed to make coding changes (and also wiring changes - you would have needed to install 14 x pin connectors onto the factory loom). The AOKEDING headlights however have 10 x pin headlight connectors - so these non-OEM headlights are designed to use the halogen coding on the central electrics module to operate LED lamps!
Again, very non-OEM!!! ................ the right one we get water unfortunately. New information - not provided in your original post!! More evidence that the right fitting is faulty I also have the light/rain sensor that doesn't work, I'm waiting for the part to arrive. Again - new information - not provided in your original post !! I wanted to point out one thing: when the switch is turned to 0 i.e. all the lights are off, the drl of the left headlight are on anyway , on the right one they are totally off, if I turn to "auto" they work both right and left but the second drl of the right headlight does not work, putting the switch on the last one i.e. low beam and drl on , the same thing so one drl doesn't work while if I put only on position lights all drl work except the second one on the top right so my doubt was that maybe something should be activated because if I put on the four emergency turn signals the drl all work coloring in amber ... Not surprising - given that this car has a faulty rain-light sensor!!! The moisture vent hole in these headlights was broken and had enlarged so water was getting in and the moisture was creating a short circuit, I bought a new headlight which I will mount to fix, the DRL was working, the fault was water probably sending moisture to the control unit and so temporarily the DRL was not working, crazy |
|
|
|
Post by momo94tn on Apr 14, 2024 21:48:12 GMT
I think they are with canbus since pa my golf has halogen headlights originally OK - if you say so!! I'm not trying to convince you that halogen headlights on MQB platform cars do NOT use CANbus - I'm very comfortable for you to believe otherwise!!
However, I suggest that you read the wiring diagrams for your Halogen lights. If you find ANY CAN wires for the Halogen headlight 10 X pin connector in the VW material, please post-up a copy of the wiring diagram (I'm always willing to learn)!! so I don't understand how the new LEDs can work without coding As I said in my first rely - this retrofit is very non-OEM. If you had installed authentic VW LED headlights, you would have needed to make coding changes (and also wiring changes - you would have needed to install 14 x pin connectors onto the factory loom). The AOKEDING headlights however have 10 x pin headlight connectors - so these non-OEM headlights are designed to use the halogen coding on the central electrics module to operate LED lamps!
Again, very non-OEM!!! ................ the right one we get water unfortunately. New information - not provided in your original post!! More evidence that the right fitting is faulty I also have the light/rain sensor that doesn't work, I'm waiting for the part to arrive. Again - new information - not provided in your original post !! I wanted to point out one thing: when the switch is turned to 0 i.e. all the lights are off, the drl of the left headlight are on anyway , on the right one they are totally off, if I turn to "auto" they work both right and left but the second drl of the right headlight does not work, putting the switch on the last one i.e. low beam and drl on , the same thing so one drl doesn't work while if I put only on position lights all drl work except the second one on the top right so my doubt was that maybe something should be activated because if I put on the four emergency turn signals the drl all work coloring in amber ... Not surprising - given that this car has a faulty rain-light sensor!!! Hi, how are you? I replaced the right full LED aftermarket headlight. When set to "0" or "auto" mode, the right DRL remains off. If I set the mode to low beams, the DRL works, while the left DRL works in both "0" and "auto" modes. I would like to understand if it can be fixed with coding as mentioned by the user above, because even with the same headlight, I thought it was faulty. By installing this new, identical aftermarket model, I encounter the same issue. I hage a golf 7 2013 2.0 TDI highline bluemotion european version, in origin alogen headlight and c |
|
I also think they are a factory defect because by the way on the right one we get water unfortunately. That said, I will check with the left headlight wires, I also have the light/rain sensor that doesn't work, I'm waiting for the part to arrive.