|
|
Post by vrejas66 on Mar 7, 2024 6:11:37 GMT
Hi guys. In the coming Home & Living home function, before the low beam and position lights came on, now the front fog lights (lights 12NL and 13NL) with the car menu but the position lights still come on. How do I deactivate the position lights in the coming Home & Living home?  Regards. |
|
|
|
Post by dv52 (Australia) on Mar 7, 2024 21:27:03 GMT
If this car has headlights with incandescent lamps (I think this is the case from your picture) - the position lights are part of the DRL lamps. So, change Coming Home oder Leaving Home aktiv to nicht aktiv on Leuchte4TFL LB4 and Leuchte5 TFL RB32
Don
|
|
|
|
Post by vrejas66 on Mar 9, 2024 11:44:11 GMT
Good morning.
I have a list and I know they are lights 4 and 5, but I've been looking for days and I can't find any Coming home & Living home function activated and being able to deactivate it.
Regards.
|
|
|
|
Post by vrejas66 on Mar 9, 2024 19:20:11 GMT
I keep trying. Someday I'll get it 😊.
Thank you
|
|
|
|
Post by dv52 (Australia) on Mar 9, 2024 21:11:27 GMT
OK- if you have looked through Leuchte4TFL LB4 and Leuchte5 TFL RB32 for Leaving Home aktiv and it's NOT there - I'm guessing that you have inadvertently told the central electrics module to turn-ON the position lights as DRLs via the "general" coding method (no offense intended). Try this: - Ignition-ON, engine-OFF
- Fire-up OBD11 and connect to the Dongle
- Select central electrics module via the Control Units screen
- Select Adaptation
- If this car is an early model Golf (build year before about mid 2016):
- Enter "Daytime" into search box and select Daytime Running Lights
- If this car is a later model Golf :
- Enter "front" into search box and select Außenlicht_Front
- Select Fahrlicht bei Tag
- Refer to the screenshot below - notice that this channel has 2 x instances of Daytime running lights as allowable settings:
- I suspect that the current value for the channel above on this car is the SECOND instance of DRLs
- Change value to the FIRST instance of DRLs
- Follow prompts to implement the coding change
- Exit OBD11 software (remove dongle) and cycle ignition
Don |
|
|
|
Post by vrejas66 on Mar 10, 2024 16:42:26 GMT
Hi. I'm sorry to tell you that your option removes the Daytime Running Lights function from my screen, it doesn't solve my problem. My Golf 7 is from 2016, and it has halogen lamps. It has H15 position light (position + high + daytime running lights) comes on in Coming Home & Living Home and I want to deactivate them, I only want the fog lights in Coming Home & Living Home. Look at Leuchte4's configuration.   Regards. |
|
|
|
Post by dv52 (Australia) on Mar 10, 2024 20:59:18 GMT
My Golf 7 is from 2016, and it has halogen lamps. It has H15 position light (position + high + daytime running lights) comes on in Coming Home & Living Home and I want to deactivate them, I only want the fog lights in Coming Home & Living Home. Look at Leuchte4's configuration. Yes, this is how "Leuchte4's configuration" is coded in your picture: Leuchte4TFL LB4
Lasttyp 4 > 9 - allgemeine Glühlampe 27W; auch H15
Lampendefektbitposition 4 > 48
Fehlerort mittleres Byte DTC-DFCC 4 > 43
Lichtfunktion A 4 > Daytime running lights
Lichtfunktion B 4 > not active
Dimmwert AB 4 > 100
Lichtansteuerung HD AB 4 > Always
Lichtfunktion C 4 > Blinken links aktiv (beide Phasen)
Lichtfunktion D 4 > not active
Dimmwert CD 4 > 0
Dimming Direction CD 4 > minimize
Lichtfunktion E 4 > Standlicht vorn (Positionslicht; Begrenzungslicht)
Lichtfunktion F 4 > Parklicht links (beidseitiges Parklicht aktiviert li & re)
Dimmwert EF 4 > 28
Dimming Direction EF 4 > maximize
Lichtfunktion G 4 > not active
Lichtfunktion H 4 > not active
Dimmwert GH 4 > 0
Dimming Direction GH 4 > maximize
If you look through the Leuchte-commands on the Lichtfunktion-channels above, this lamp is programmed for the following lighting functions:: - Lichtfunktion A 4 > DRL
- Lichtfunktion C 4 > DRL wink (the DRL switches-OFF on one car-side when the turn-signal is activated)
- Lichtfunktion E 4 > Position Light (ONLY when the rotary Light switch is in the
 position)
- Lichtfunktion F 4 > Single Side Position Light (the Position Light on one car-side stays illuminated when the turn-signal stalk is left activated after the ignition is switched-OFF and the doors are locked)
The H15 lamp on this car has 2 x separate filaments - so the High-beam function for this lamp is NOT controlled by Leuchte4. Instead, High-beam is controlled by Leuchte8 As you can see, Leuchte4 is NOT coded for Coming/Leaving Home. Anyhow, do this: - Check the 09 module : Comfort illumination-Coming Home Leuchten > fog light
If the problem persists try this: Leuchte4TFL LB4 and Leuchte5 TFL RB32
- Lichtfunktion D 4 > Coming Home oder Leaving Home aktiv
Don
|
|
|
|
Post by vrejas66 on Mar 10, 2024 22:35:10 GMT
Ok, when I have time I will do it.
Regards.
|
|
|
|
Post by dv52 (Australia) on Mar 10, 2024 23:20:54 GMT
check my response again - note Leuchte4TFL LB4 and Leuchte5 TFL RB32 are the correct Leuchte-sets to change
|
|
|
|
Post by vrejas66 on Mar 11, 2024 17:05:00 GMT
Hi.
You are right, the H15 lamp has two filaments, one for high beam lights 8 and 9 (long range) and the other for lights 4 and 5 (daylight and light position).
I'm going to keep working on it.
Regards.
|
|
|
|
Post by vrejas66 on Mar 11, 2024 22:16:17 GMT
I'm going crazy 😩😩.
I do not want the H15 lamp to turn on when Coming Home & Living Home is activated.
I have also tried: 09 - Adaptation - Daytime running light (0D02), but I can't find the solution.
I want only the fog lights to turn on in Coming Home & Living home.
|
|
