Post by nagygee on Feb 19, 2024 14:15:47 GMT
After almost a year trying to find working solutions to enable traffic sign recognition with OBDEleven Ultimate in my A5 F5 Cabrio (2017) , I decided to order an OBDApp dongle flatrate. Well, flatrate was quite without any reasons since I could do all other possible codings with OBDEleven (compliments!)...
OBDApp dongle was however necessary to do the necessary parametrization of the camera which was not to do with OBDEleven.
After istalling, TSR works improperly:
- 30-60 secs after setting up with the car, in VIS appears a fault message that the TSR works improperly, see manual.
- TSR notices the traffic signs with speed limits when passing by, but only speed limits (e.g. overtaking prohibits e.t.c are not recognized).
- it does not handle the end of speed limits unless it is definitely signalled by another traffic sign (new speed limit or end of speed limit). Otherwise I can see the invalid speed limits minutes long after the limitation ended.
- as seen on the picture, different speed limits may appear in VIS and the multumedia if the sign recognized by TSR is different to the limits on the map. Most probably some coding is necessary to have the speed limits of the map in the VIS. Maybe this coding would handle the issue of not resolving the speed limits as well.
Any hints, coding advises would be appreciated. I am helpless...
