|
1.5.0
Jan 16, 2024 8:56:18 GMT
Post by Justinas on Jan 16, 2024 8:56:18 GMT
Use the following format to report bugsDescription of bug: your bug descriptionAndroid software version: your android version Phone: your android phone model Car: your vehicle brand, model and year App profile: your app user email or username Changelog
v1.5.0
- Added a screen listing all supported vehicles - Fixed an issue where some control units were missing from history view
|
|
|
1.5.0
Jan 16, 2024 22:36:30 GMT
Post by whataboutthis on Jan 16, 2024 22:36:30 GMT
Do you have to be connected to see this screen, if not can you please confirm where this scree is.
|
|
|
1.5.0
Jan 20, 2024 15:35:09 GMT
Post by whataboutthis on Jan 20, 2024 15:35:09 GMT
Description of bug: See Below Android software version: 11 Phone: tcl t774h Car: see below App profile: cupra280
Firstly I would say I am very dissapointed in this app for OBD2 Devices, back in the day under the VAG App I was able to run live data (gave me a standadised set of items), Use Charts to record the data, See the VIN Number of the motor but no more sadly.
Motor was Ford Torneo 2017
Issue was live data shows me the following items (wow I am overwhelmed) Calculated engine lod Engine coolant temp Intake manifold absolute pressure engine speed Mass air flow sensor
I then get the feature what live data would you like to add, or do you have some other ideas - Leave feedback.
My feedback is that if I use Torque I get lots and lots of live data, I can create charts, combine GPS Data with car data etc and certainly in the old version of the OBD2 Setup there was a standard OBD2 List of options which no longer appear So my bug is why dont I have the live data elements I used to have when the VAG App used to support this Ford Motor (many years ago)
Further Under the About tab i get the info that shows the VIN Number and Name and Make but by default the Name and Make are both set to Ford as I could have multiple cars in my garage this is not very helpful. In this app there is no way to be able to change the Name to the Model this has to be done via the VAG App but these changes are not carried across to the OBD2 App so not very helpfull.
Further you cant add pictures in this App and I tried to do so in the VAG App and that did not work either, although it used to work.
Motor was a Honda Jazz
Firstly I tried to connect and I got the error message "Check Ignition, Retry" so I retried and it said I had to enter the VIN Number. So i typed in the VIN Number but I was not sure if it contained 387OHX (Being the Letter O) or 3870HX (Being the number zero). I started with the letter being zero, it recognized it as a Honda (possative) and then i started a Scan, scan crashed and i started again and got the same issue as above but this time I used the Letter 0 and went and run a scan.
My garage now has two cars in it both of which have a single scan but one of them must be wrong because the VIN Number is incorrect so how does the system work if it cant read the VIN Number (in the past it would reject the number as invalid)
Next Live data - there is none and it kindly suggest I try again or come back later. I connected my Torque app and managed to get live data with no issues, again with charts, GPS Data etc
Again I cant update the Name in the app and if I change it in the VAG App it does not copy across (I have rebooted my Phone just to double check.)
|
|
|
1.5.0
Jan 22, 2024 9:08:22 GMT
Post by whataboutthis on Jan 22, 2024 9:08:22 GMT
Well partial answer on Facebook, Live data should read Limited Live Data as you only get 5 items.
|
|