|
|
Post by gabrielepreziosa on Nov 27, 2023 16:57:50 GMT
This is a guide to enable the RS Monitor on A3 or S3 8Y models.  Keep the hood open and when asked (if asked) unlock the SFD. On Control Unit 5F- Long Coding
- Bit Mode
- Byte Index 5
- Bit 0 should be 0 (unchecked) by default, set it to 1 (checked)
Then we need to restart the MMI, with engine on press with 2 fingers the clock on the top-right of the MMI screen, then select restart to normal mode.
Hope this guide is useful.
|
|
n1tr0
New Member
Posts: 27
|
Post by n1tr0 on Nov 27, 2023 18:27:34 GMT
Is that really working? Shows it all data with engine oil etc?
|
|
|
|
Post by gabrielepreziosa on Nov 27, 2023 19:28:06 GMT
Yes, it show complete data, excerpt brakes temperature.
|
|
n1tr0
New Member
Posts: 27
|
Post by n1tr0 on Nov 27, 2023 20:29:04 GMT
Hmm, on my S3 is Byte 05 and bit 1 already Set to on (checked) by default with no Monitor. Or do you mean bit 0 to change?
Maybe do you have a Screenshot?
|
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 114 
|
Post by mat on Nov 27, 2023 21:50:35 GMT
I used this:
Module : 5F
Long-Coding -> vehicle_type_power_stage_1 -> Yes to -> No
Long-Coding -> vehicle_type_power_stage_2 -> No to Yes
Adaptation > Vehicle Menu Operation:
menu_display_SportHMI -> yes
menu_display_SportHMI_over_threshold_high -> yes
Its pretty useless really, but does show the temps for engine oil, coolant and gearbox oil.
|
|
|
|
Post by gabrielepreziosa on Nov 27, 2023 23:07:22 GMT
Hmm, on my S3 is Byte 05 and bit 1 already Set to on (checked) by default with no Monitor. Or do you mean bit 0 to change? Maybe do you have a Screenshot? You are well, it was Bit 0 that shout be modified from 0 to 1.  |
|
|
|
Post by gabrielepreziosa on Nov 27, 2023 23:09:11 GMT
I used this: Module : 5F Long-Coding -> vehicle_type_power_stage_1 -> Yes to -> No Long-Coding -> vehicle_type_power_stage_2 -> No to Yes Adaptation > Vehicle Menu Operation: menu_display_SportHMI -> yes menu_display_SportHMI_over_threshold_high -> yes Its pretty useless really, but does show the temps for engine oil, coolant and gearbox oil. What about power_stage parameters, do you know what they mean? |
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 114
|
Post by mat on Nov 28, 2023 10:54:59 GMT
I'm not sure what the power stages mean, but S3 is Power stage 1, RS3 is Power stage 2. I've not been brave enough to check power stage 3 !
It doesn't seem to affect anything other than the RS monitor.
It would be helpful to see on your vehicle, check the long-coding (use the OBD list - first icon, not the binary icon), to see what your power stage is set to - the OBD list should map to the same Binary settings)
|
|
|
|
Post by gabrielepreziosa on Nov 28, 2023 10:59:09 GMT
My A3 has power stage 2 active after that bit change, so seems to be this settings.
|
|
n1tr0
New Member
Posts: 27
|
Post by n1tr0 on Nov 28, 2023 16:36:53 GMT
But does that also mean that byte 05 bit 1 has to be deactivated, otherwise stages 1 and 2 are activated at the same time? Factory setting:
Byte 05 bit 0 disabled
Byte 05 bit 1 enabled
I do not think that this is be done without deactivatr bit 1 like in your Screenshot or via List like Mat told.
|
|
|
|
Post by gabrielepreziosa on Nov 28, 2023 16:45:22 GMT
On my A3 Bit 0 and Bit 1 was 0; i only enabled Bit 0.
|
|
n1tr0
New Member
Posts: 27
|
Post by n1tr0 on Nov 28, 2023 17:31:17 GMT
Ok, thank you. I will try it.
|
|
|
|
Post by arandax on Dec 10, 2023 14:23:53 GMT
Did you noticed if torque gauge shows 20-21% torque as maximum value after this coding?
|
|
|
|
Post by gabrielepreziosa on Dec 10, 2023 14:27:49 GMT
Not in my case, gauge meter works correctly for me.
|
|
|
|
Post by audi8y2021 on Dec 11, 2023 20:06:22 GMT
With my car it is about max 53%. But the power is 100%. So I was already wondering if it is possible to calibrate that somehow. If someone knows anything about it I would like to know  |
|
|
|
Post by gabrielepreziosa on Dec 11, 2023 20:15:11 GMT
The torque/power monitor seems to work only in TDI models.
|
|
|
|
Post by audi8y2021 on Dec 13, 2023 15:25:05 GMT
What do you mean by TDI? I have the 35TFSI MHEV. Power works fine, torque only goes up to 50-ish%/
|
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 114
|
Post by mat on Dec 13, 2023 17:53:23 GMT
Turbo Diesel Injection. Different type of engine that you have !
|
|
mat
Closed beta tester
S3 Vorsprung 8Y 2023
Posts: 114
|
Post by mat on Dec 13, 2023 17:54:07 GMT
The torque/power monitor seems to work only in TDI models. Works fine in my S3 |
|
|
|
Post by gabrielepreziosa on Dec 13, 2023 18:01:14 GMT
The torque/power monitor seems to work only in TDI models. Works fine in my S3 Probably the problem are only on A3 models with no TDI engine. Excluded S3. |
|
|
|
Post by audi8y2021 on Dec 14, 2023 10:33:14 GMT
But maybe there is a way to calibrate the torque.
|
|
|
|
Post by arandax on Dec 17, 2023 14:10:42 GMT
My car is a 2020 S3 and used to work fine, but recently I've noticed that torque only max to 22%.
As I said before, it used to work perfectly before (didn't remember when)
|
|
|
|
Post by audroad on May 21, 2024 17:50:54 GMT
This is a guide to enable the RS Monitor on A3 or S3 8Y models. View AttachmentKeep the hood open and when asked (if asked) unlock the SFD. On Control Unit 5F- Long Coding
- Bit Mode
- Byte Index 5
- Bit 0 should be 0 (unchecked) by default, set it to 1 (checked)
Then we need to restart the MMI, with engine on press with 2 fingers the clock on the top-right of the MMI screen, then select restart to normal mode.
Hope this guide is useful.
Checked on mine, A3 8Y S-Line 2024 without virtual cockpit plus, and no new menu or information appears on MMI. Can you help me? Thanks
|
|
|
|
Post by gabrielepreziosa on May 21, 2024 18:47:27 GMT
This is a guide to enable the RS Monitor on A3 or S3 8Y models. View AttachmentKeep the hood open and when asked (if asked) unlock the SFD. On Control Unit 5F- Long Coding
- Bit Mode
- Byte Index 5
- Bit 0 should be 0 (unchecked) by default, set it to 1 (checked)
Then we need to restart the MMI, with engine on press with 2 fingers the clock on the top-right of the MMI screen, then select restart to normal mode.
Hope this guide is useful.
Checked on mine, A3 8Y S-Line 2024 without virtual cockpit plus, and no new menu or information appears on MMI. Can you help me? Thanks
Try rebooting your mmi, keep power button for 25 seconds. |
|
|
|
Post by audroad on May 21, 2024 19:51:42 GMT
Checked on mine, A3 8Y S-Line 2024 without virtual cockpit plus, and no new menu or information appears on MMI. Can you help me? Thanks
Try rebooting your mmi, keep poker button for 25 seconds. I rebooted MMI after coding. Do you mean to keep power button pressed for 25 seconds after all process? Thanks
|
|
|
|
Post by gabrielepreziosa on May 21, 2024 20:20:15 GMT
Try rebooting your mmi, keep poker button for 25 seconds. I rebooted MMI after coding. Do you mean to keep power button pressed for 25 seconds after all process? Thanks
Exactly. Let us know |
|
|
|
Post by audroad on May 21, 2024 20:41:13 GMT
I rebooted MMI after coding. Do you mean to keep power button pressed for 25 seconds after all process? Thanks
Exactly. Let us know But, power button of the MMI? Or start car button? |
|
|
|
Post by gabrielepreziosa on May 21, 2024 20:43:09 GMT
But, power button of the MMI? Or start car button? Power button on the mmi. |
|
|
|
Post by audroad on May 22, 2024 14:58:06 GMT
But, power button of the MMI? Or start car button? Power button on the mmi. All tested, but not working. No new menu  |
|
|
|
Post by aldmit on May 22, 2024 17:30:30 GMT
which version MMI ?
|
|
