|
|
Post by mattalla on Nov 25, 2023 20:49:53 GMT
Is there any way I can code for the light bar to stay on with the DRL’s. The light bar only lights up with the “auto” function. If a new update can be made to turn it on permanently that would be amazing!
|
|
|
|
Post by philld on Nov 25, 2023 23:10:26 GMT
Search
|
|
|
|
Post by melkool on Nov 27, 2023 8:55:37 GMT
Yes search but it does not have the same light intensity as the DRLs and the looks is badpy. I do not recommend this.
|
|
|
|
Post by lupinmargot on Feb 10, 2024 20:56:42 GMT
Save guys, have you found a way to keep the light bar on all the time with drl?
|
|
|
|
Post by paneuropean on Feb 10, 2024 23:49:03 GMT
It can be done, if you do a search on the subject you will likely find directions (I have seen them posted at some time in the past), but as fellow forum member melkool noted in his post above, it doesn't look good because the trim strip does not illuminate at the same intensity as the DRLs do. Take a look at the DRLs (the U-shaped component around the outboard headlights) on your car when only the DRLs are illuminated, and then take a look at that same component when the headlights are illuminated. You will see that the DRL component dims considerably at night when the headlights are on, and as a result, its luminosity matches the trim strip at night... but not during the daytime. Michael |
|
|
|
Post by dv52 (Australia) on Feb 11, 2024 3:09:41 GMT
Is there any way I can code for the light bar to stay on with the DRL’s. The light bar only lights up with the “auto” function. If a new update can be made to turn it on permanently that would be amazing! Try this: Leuchte 31 AMBL 1 C61 and Leuchte 32 AMBL 2 C35 - Lichtfunktion J 31 > Tagfahrlicht
- Dimmwert JKL 32 > 100 (or 127)
Don
|
|
Adi
New Member
Posts: 1
|
Post by Adi on Nov 3, 2024 15:42:12 GMT
Hey Don,
The "Lichtfunktion J" option didnt work but the "Lichtfunktion G" option worked (Tagfahrlicht + dimmwert 127) but the dimmwert remains low no matter the setting, i guess the ledbars cant illuminate more than that. Also the "Adaptive Lane Tracking" does not appear in my menu (Long coding "Early_setting_over_menu). No matter i only use Travel assist anyways.
|
|
