|
Post by sandergoo on Nov 25, 2023 16:25:53 GMT
Hi all, I've recently bought the OBD Eleven mainly for the taillight animation. I've got a 2021 audi a3 sedan with the LED lights and dynamic blinkers (not matrix). My MMI version is 3458. Connecting the OBD and enabling the App works without any errors but the taillight animation isn't working. I've now also tried it manually with '5' and even input '6' but without success (i'm still not receiving any errors). The hood has been open while trying. Anyone with the same issue/same MMI?
|
|
|
Post by peandka on Nov 25, 2023 20:00:24 GMT
Got it working on the Sportback version
- open the hood
- unlock central electrics in SFD
- under adaption search for "intelligente Heckleuchte verbau"
- change value to 5 or 6 - reset MMI - to fingers on the right upper corner
now it should work when it is dark outside, or cover the light sensor in the window to test it out.
if it doesn't work try value 6 and repeat the steps
|
|
|
Post by sandergoo on Nov 26, 2023 15:24:47 GMT
Thanks for your reply, see my screenshot in the post. I've already tried 5 and 6 sadly..
|
|
|
Post by gabrielepreziosa on Nov 27, 2023 17:17:30 GMT
It depends on the serial number of your headlights, some are compatible, some are not.
Unfortunately there is no corrective action in case of incompatible SN.
|
|
|
Post by sandergoo on Nov 29, 2023 14:46:49 GMT
Do you perhaps know which ser. number should be compatible, and how i can check this?
|
|
|
Post by audi8yuser on Dec 2, 2023 13:57:58 GMT
I also have had this issue when doing it with "long coding" or "adaptation". I had to use the "one click apps" for it to work... Still need to pop te hood open for it to work.
The interesting thing is, after i did change my rear lights with RS-Animations, i went to the (09) central electronics module and checked if the value was still 0 or 5/6. The value there is still 0, so i am wondering which value the OneClickApp has done?
Maybe ask OBDELEVEN team for help?
|
|
|
Post by harral24 on Dec 2, 2023 17:34:00 GMT
Do you think you could copy your entire code over and we can maybe cross reference each individual code to see what may be different, I too am having trouble making it work,
Tried all the above, just not tried one click apps yet, also could you tell us what MMI version your on? Mine is 6820
|
|