|
|
Post by mencey on Nov 22, 2023 15:38:06 GMT
ECU 19 GATEWAY
Adaptacion
Seleccion de perfil de conductor
FPA_Personalisierung ----> active
FPA_Kombi_Status_Unterdruecken -----> no_active
FPA_Kombi_Anzeige -----> active
|
|
tonyl
New Member
Posts: 2
|
Post by tonyl on Nov 24, 2023 11:58:15 GMT
So with this you can see driving mode on small screen behind steering wheel? How and where it showing that?
|
|
|
|
Post by mencey on Nov 26, 2023 10:12:44 GMT
|
|
laurg
New Member
Posts: 9
|
Post by laurg on Nov 26, 2023 16:04:47 GMT
ECU 19 GATEWAY Adaptacion Seleccion de perfil de conductor FPA_Personalisierung ----> active FPA_Kombi_Status_Unterdruecken -----> no_active FPA_Kombi_Anzeige -----> active You need to unlock SFD for this? That will remain somewhere into the computer and VW will see this? |
|
|
|
Post by mencey on Nov 29, 2023 13:49:39 GMT
Everything you do with odbeleven will be in the car's history, if they want to look at it when you take it to the shop they will see it. Normally they don't look at it and if they see it nothing usually happens, you would have to cause a fault with the coding for them to charge you money to fix it and that repair would not be covered by the warranty, but only that fault. Everything else on the car would still be under warranty. That is why it is always advisable to make a backup copy of the control unit that we are going to code in order to recover its initial configuration if it stops working due to a bad coding. Greetings !
|
|
|
|
Post by malakudi on Jan 12, 2024 18:55:05 GMT
I tried this and worked, thank you. Unfortunately, car still starts at Comfort mode even though ECO is displayed in the small icon (and in Infotainment Mode Menu of course).
|
|
