|
|
Post by Pepay on Aug 17, 2017 7:10:06 GMT
Anyone have coding so inner lights work as tails
|
|
|
|
Post by vwjap on Aug 17, 2017 11:09:38 GMT
Just having a little look, I got it half working, as in half the miners light up so it looks like there maybe 2 sets of leds
Although I don't have the dynamic indicators just normal
|
|
|
|
Post by vwjap on Aug 17, 2017 13:47:15 GMT
Didn't have much luck The light I was able to switch on was the fog light, but looking at the coding it looks like you have to configure the all the 4 lights to tell the car what leds are in it, Btw the fog light is leuchte26  |
|
|
|
Post by vwjap on Aug 17, 2017 17:29:53 GMT
Right a bit more digging after I got back from hospital (nothing to do with coding 😂😂)
So 26 does do the offside (rhd cars) inner but there's only 3 LEDs in it and they are more towards the middle so look a bit offish
I'm guessing 27 does the near side but nothing will turn the light on as I opened the boot and the wire is not there
Also what I worked out was that in the sub menu the a b c d are the priority so if you have something in a and b and you use b then you use a, the a setting will go have priority
So the bit in my setting a is fog light unless trailer attached and set to 127 brightness and if I set c as brake light at 100 then if I put my foot on the brake it will set the LED at brightness of 100, if I turn my rear fog on then the brightness will go up to 100,
Hope this makes sense
|
|
