ice84
New Member
Posts: 4 
|
Post by ice84 on Aug 12, 2017 7:16:06 GMT
How to code this whit the OBDeleven? 8:45 in video, Youtube. (Create an app??  ) |
|
|
|
Post by Hansdampf on Aug 12, 2017 17:34:36 GMT
Do you have the hardware installed (Bumper etc.)? There are different ways of coding. Sorry - it's german:
Variante1:
Byte 12 -> STG 46 (Komfortsystem) auswählen -> STG Lange Codierung -> Funktion 07 -> Byte 01 Bit 4 (ZV-Heckklappe Softtouch) -> Häkchen setzen
Byte 19 (18 falls 19 nicht vorhanden) -> STG 46 (Komfortsystem) auswählen -> STG Lange Codierung -> Funktion 07 -> Byte 01 Bit 4 (ZV-Heckklappe Softtouch) -> Häkchen setzen
Variante2:
Byte 01 Bit 3 (ZV-Heckklappe Innentaster via CAN)
Byte 01 Bit 4 (ZV-Heckklappe Softtouch)
Byte 02 Bit 3 (ZV-Heckklappe 1-Motoren-statt 2-Motoren-Schloss) verbaut ein Häkchen setzen.
|
|
ice84
New Member
Posts: 4
|
Post by ice84 on Aug 12, 2017 19:35:30 GMT
Thanks. I'll test it tomorrow.
No, I have not bought the kit yet, I want to see that I get it programmed first.
|
|
ice84
New Member
Posts: 4
|
Post by ice84 on Aug 13, 2017 15:06:17 GMT
Done! This was easy ... - Control unit 46 (Central Module Comfort System) - Long code - Go to Byte 01 - Enable bit 4 - Done! Now I just have to buy the hardware ...  |
|
ice84
New Member
Posts: 4
|
Post by ice84 on Sept 10, 2017 18:21:37 GMT
|
|
tmex
New Member
Posts: 1
|
Post by tmex on Jun 18, 2018 17:08:52 GMT
I needed to enable
byte01
bit 3 and 4(already enabled)
Byte02
Bit 3
|
|
|
|
Post by black gti on Sept 12, 2018 8:11:37 GMT
Can't find byte 01 under 46 control unite, there's different ones but no 01 byte.
|
|
|
|
Post by black gti on Sept 12, 2018 8:36:10 GMT
How to code the key fob?
|
|
|
|
Post by Hansdampf on Sept 12, 2018 20:22:49 GMT
You need not code the fob but the control unit ...
|
|
)
