|
|
Post by mikahn on Oct 16, 2023 9:50:31 GMT
I have a new (MY2024) A6 TFSI e and the traffic sign speed warning is activated all time I start the engine, I can everytime deactivate it, but is it possible to code it to not beeing activated everytime I start the engine.
Assume it will be in adaptation, but havent found it yet.
|
|
|
|
Post by a4mythos on Oct 20, 2023 17:31:49 GMT
If you mean by when the little speed limit sign flashes in VC and HUD when you go a couple kmh/mph over the speed limit, then in my car it is in car setting-> driver’s assist-> traffic sign recognition-> then scroll at the bottom of that page it will say like speed warning … then you can go no warning, 1 mph, 3mph, ….
|
|
|
|
Post by mikahn on Oct 20, 2023 20:27:27 GMT
I think its the same, but in MY 2024 the function will be activated all time you start the car. You can deactivate it every time you start the car, but I asking if its possible not let the car activate the function everytime the car is started (with OBDeleven)
|
|
|
|
Post by jarx2binks on Oct 24, 2023 11:20:35 GMT
Same thing here.
Every new start of the ignition turns the function back on.
I also would be greatly interested in turning this off or at least make it remember the last state.
|
|
|
|
Post by math8888 on Dec 20, 2023 16:14:33 GMT
Yea - 2023 a6 avant - every time I go a few Miles over the posted speed limit - the limit the sign recognition camera picks up - I get a warning like a seat belt warning that just keeps binging and continues to bing constantly- I can turn this warning off but it resets every time car is restarted - there has to be a way of coding this out or at least a remember last used state
|
|
