|
Post by probles29 on Oct 15, 2023 1:41:50 GMT
Hello everyone,
I have a 2023 VW GTI 40th Anniversary and I am from the U.S.
Some time ago I was on the road and unfortunately someone left a bumper on the road, I had no choice but to go over it since I was already to close to move. When I went over it the Fault Suspension warning light came one.
I checked the bottom of the car and the ride height sensor broke. I went ahead and ordered a OEM replacement and I was able to install it, however, the warning light is still on.
I keep trying to clear the faults through OBDELEVEN, however, I cannot seem to get it to clear.
I was advised to recalibrate the lights however, when I try and do it nothing happens.
Here are the fault codes any help will be much appreciated .
OBDeleven vehicle history log Date: 2023-10-14 19:41:27
VIN: WVW9A7CD8PW154166 Car: Volkswagen Year: 2023 Body type: UNKNOWN Engine: DRNA kW ( hp) l Mileage: 10433 km
--------------------------------------------------------------- 4B Multifunction Module System description: FCM2020 Low Software number: 5WA907338B Software version: 1447 Hardware number: 5WA907338 Hardware version: H14 Faults: C1036F1 - Left rear level control system sensor Sensor replacement detected static Priority - 6 Malfunction frequency counter - 1 Unlearning counter - 40 km-Mileage - 10425 km date - 2023-10-14 16:58:42 C107E54 - Headlight No basic setting static Priority - 2 Malfunction frequency counter - 1 Unlearning counter - 40 km-Mileage - 10425 km date - 2023-10-14 16:58:40
|
|
|
Post by newty on Oct 15, 2023 12:15:44 GMT
Your car is equipped with DCC right?
I think you will need to do the basic setting adaption with deflected wheels beforehand (with the car lifted). Also, you might need to wait for a bus rest after that.
I had a similar issue when flashing 4B, but the new installation errors just went away magically after some time
|
|
|
Post by probles29 on Oct 17, 2023 2:22:19 GMT
Thank you so much that was exactly what it needed.
|
|