Post by thechuckalolis on Oct 8, 2023 18:41:44 GMT
Hoping someone here who is more experienced with OBDeleven and this type of fault diagnosis can help me try and resolve this issue.
Basically having an intermittent issue where the temperature control knob doesn’t correlate with the temperature of the air being blown out of the vents. My car does not have dual zone auto climate, so it seems like the issue has to do with the temperature flap actuator (5Q0907511H). Sometimes this issue can be fixed by turning the car on and off, or by turning the temp to the opposite extreme for a few seconds.
OBDeleven is giving me two codes:
B108F54 - Temperature flap motor, no basic setting
B109715 - Temperature flap positioning motor sensor, open circuit/short circuit to B+
I can’t find a definitive answer on whether this is an issue that can be solved with programming, or whether it’s just a faulty actuator. I‘ve tried to adapt flap end stops in OBDeleven but have had no success.
Any help is appreciated! This actuator is quite expensive so hoping to find a simple fix first.
Basically having an intermittent issue where the temperature control knob doesn’t correlate with the temperature of the air being blown out of the vents. My car does not have dual zone auto climate, so it seems like the issue has to do with the temperature flap actuator (5Q0907511H). Sometimes this issue can be fixed by turning the car on and off, or by turning the temp to the opposite extreme for a few seconds.
OBDeleven is giving me two codes:
B108F54 - Temperature flap motor, no basic setting
B109715 - Temperature flap positioning motor sensor, open circuit/short circuit to B+
I can’t find a definitive answer on whether this is an issue that can be solved with programming, or whether it’s just a faulty actuator. I‘ve tried to adapt flap end stops in OBDeleven but have had no success.
Any help is appreciated! This actuator is quite expensive so hoping to find a simple fix first.
