|
Post by lowkey on Sept 30, 2023 1:28:17 GMT
Hi,
I purchased OEM VW parking sensors, wiring harness and control module and had them installed professionally.
I am looking for help Long Coding this to enable it for my MK7.
Can anyone assist?
|
|
|
Post by dv52 (Australia) on Sept 30, 2023 2:17:03 GMT
lowkey : Hi. So, the software switch in long-code that tells the new 76 Parking Assistant module that PDC (Park Distance Control) is installed is on Byte 02, Bit 0. And if you want the PDC to be automatically enabled, set Bye 03, Bit 4. What's not clear from your words is how the PDC is to be displayed on this car. I suspect that you will also need to activate the PDC function in the MIB. However, I don't know which version MIB is on this car - but because you have posted in the mk7 forum, I will assume a MIB1 for the changes below:
Vehicle menu operation - menu_display_pdc > activated
- menu_display_pdc_over_threshold_high > activated
Vehicle function list CAN - PDC_audio_lowering > Available
- PDC_audio_lowering_msg_bus > Suspension data bus
Vehicle function list BAP - parking_assist_0x0A > activated
- parking_assist_0x0A_msg_bus > Terminal 15
Don
|
|