|
Post by born2023 on Sept 22, 2023 9:18:35 GMT
Hi everyone,
I have a Cupra Born 2022, from Portugal, and I've bought OBD11 so that I could change the value of Lane Assist Memory to OFF. It's not working and I don't know why. It keeps giving an error "Check Ignition and try again". I've tried with the ignition on and with the ignition off, same result.
I'm new to OBD11, so can anyone help me? what am I doing wrong?
Thanks in advance.
|
|
Berny
New Member
Posts: 21
|
Post by Berny on Sept 23, 2023 18:50:29 GMT
Hi, is the Bonnet open or closed? It should be open - firewall. The system should be "running", foot on brake. I am not sure regarding another firewall - door on driver side. I kept it open.... I had never a problem with Long Coding. The only thing I did was Long Coding for the TA, I had to repeat after software update to 3.1 and 3.2.1. Did your Born receive updates in 2023 at a service station? If not, then contact your service station.
|
|
|
Post by born2023 on Sept 25, 2023 8:52:05 GMT
I've tried with the bonnet opened, with the driver's door opened, foot on the brake, etc, and it didn't worked. Then, I've closed everything again but stayed inside the car playing with the obd11 app and reading some other values. Before disconnecting, I've made one last try, and it worked!!
I can´t explain this but maybe it needs some time to read everything before it can make some changes?!?
Resuming, right after connection (1 or 2 minutes) it didn't worked, but after about 10 minutes, it worked.
Thanks for your help!
|
|