|
Post by kwwood on Sept 3, 2023 14:57:06 GMT
I am trying to change the Auto Unlock and it has been writing for about an hour (for one change) what is the expected length of this? If it started writing I assume all the prerequisites were already fulfilled?
Thanks
|
|
|
Post by dv52 (Australia) on Sept 3, 2023 21:27:20 GMT
kwwood : Hi. When you say "writing", I assume you mean that you have changed a coding value on the OBD11 software and you have subsequently pressed the implement symbol.
If so, the writing process should take a few seconds - depending on what else the CAN network is doing at the time. If it's taking an hour, I suspect the something has gone wrong and you should probably start again (likely no change has occurred)
The important comms conditions when using OBD11 is the quality of the ISP service at the location of use and the Bluetooth connection. These are critical to the user experience.
Don
|
|