|
Post by ensartk3 on Aug 16, 2023 21:31:09 GMT
hello , does anyone knows how to code vim on Audi A6 c8 without spending credits but by coding it? Thanks
|
|
|
Post by tomik148 on Aug 27, 2023 6:13:03 GMT
Make sure the hood of the car is opened. Turn on the car, but not the engine
Connect to OBDEleven
Under the Control Units > Module: (5F) Multimedia. select the "Change Service" and select "VW diagnostic mode". Then select Adaption and change the follow below:
nhtsa_properties I switched everything that was "activate" to "Not activated"
Locked menu contents I switched everything that was "activate" to "Not activated"
Once completed, hold down the Volume button (not the one on the steering wheel) until the MMI restarts. Now you can enjoy VIM,
|
|
|
Post by ensartk3 on Aug 29, 2023 14:27:26 GMT
than you it worked:)
|
|
|
Post by ferroconsta on Sept 7, 2023 22:52:16 GMT
Very good it’s work !! Thank you are gehe best
|
|