Coded remote window up/down, keyless entry issue

Hello,

I have a 2015 S3.  I used the app to code windows up and down with remote.  It works nice, but now my keyless entry only unlocks the driver's door.  Before the coding, keyless entry from the factory enabled all doors to unlock when I touched the driver's door handle from outside.  Now I have to unlock other doors by either pressing the remote unlock a second time or press the door unlock inside on the door button.
So is it a drawback to code remote windows and have it interfere with keyless entry?  I'd like the keyless entry to work normally.  

The other thing I can think of is that I tried to code the rain sensor window close the day before and giving up on it.  So that complicates matters a bit and I hope I'm not making this too confusing.  After I tried to follow instructions on how to code rain sensor automatic window closing, I gave up since it didn't seem to work.  I then decided to use 10 credits and have the remote key window up/down coding done instead.  So I now have to go back to the original instructions I tried for rain sensor procedure and see if what I did there is what disabled my keyless entry on all doors

Thanks for any input/help