Post by h1l4r1o on Aug 4, 2023 11:13:42 GMT
Vehicle:
Audi TT 2010
App name:
Coming/Leaving Home whitout rain/light sensor
Description:
Low beam, taillight and license plate lights come on. This function is designed to help the driver get into the car (figuratively speaking, he's leaving his home) and make it easier to get to the car.
Control unit:
[09 – Central Electricity] -> [Coding- 07] -> [Long Coding Wizard]
Stay in byte 0 and enable bits 5 and 7
Then go to the Adaptation tab (always module 09),
The value in Channel 01 represents the ignition time in seconds after locking the doors.
The value in Channel 02 represents the switch-on time in seconds after unlocking the doors.
There are 2 operating modes for coming/leaving home. The default is "old mode": the bit is set to 0.
It's always in module 17 (Instruments), byte 23.
Audi TT 2010
App name:
Coming/Leaving Home whitout rain/light sensor
Description:
Low beam, taillight and license plate lights come on. This function is designed to help the driver get into the car (figuratively speaking, he's leaving his home) and make it easier to get to the car.
Control unit:
[09 – Central Electricity] -> [Coding- 07] -> [Long Coding Wizard]
Stay in byte 0 and enable bits 5 and 7
Then go to the Adaptation tab (always module 09),
The value in Channel 01 represents the ignition time in seconds after locking the doors.
The value in Channel 02 represents the switch-on time in seconds after unlocking the doors.
There are 2 operating modes for coming/leaving home. The default is "old mode": the bit is set to 0.
It's always in module 17 (Instruments), byte 23.
