Seat Symmetry + Passenger Seat Control

CombTech
New Member

Posts: 3

Seat Symmetry + Passenger Seat Control Jul 19, 2017 13:16:51 GMT

Quote

Post by CombTech on Jul 19, 2017 13:16:51 GMT

I have seen the following for Seat Symmetry + Passenger Seat Control

Description: For Q7 (4M) cars that have BOTH Driver and Passenger memory seats installed (with the buttons in the doors) you can make both the driver's seat and passenger seat "line up" so they are symmetrical. In addition, you can move the passenger seat using the seat movement buttons on the driver's seat. This change enables these features if you have ONLY Driver Memory Seat installed
Notes: Not been tested on Q7 4M cars that have neither driver or driver/passenger memory seats installed but it should work. You need to do the SAME coding in Modules 06 and 36.
Usage: Once coded, go into MMI, Car / Vehicle Settings / Seats. A new option for Passenger Seat will have appeared. There will be 2 options inside. One to line both front seats up together, and the other to move the passenger seat with the driver seat movement buttons
Risk: Low

Coding:

1. Module 06 - Passenger Seat Module & Module 36 - Driver Seat Module
2. Coding
3. Long coding
4. Long coding helper (VCDS)
5. Byte 2
6. Tick "Bit 5"
7. Byte 6
8. Tick "Bit 1"
9. Exit
10. Do It

Can this be done with ODBEleven?

Thanks for the help...

mmessick New Member Posts: 2	Seat Symmetry + Passenger Seat Control Aug 2, 2017 21:38:46 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by mmessick on Aug 2, 2017 21:38:46 GMT Yes it can, no problem.

windy New Member Posts: 1	Seat Symmetry + Passenger Seat Control Sept 1, 2017 5:32:19 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by windy on Sept 1, 2017 5:32:19 GMT Would you please show the steps for ODBeleven?

theold boy
Guest

Seat Symmetry + Passenger Seat Control Sept 1, 2017 9:34:09 GMT

Quote

Post by theold boy on Sept 1, 2017 9:34:09 GMT

Coding:

1. Module 06 - Passenger Seat Module & Module 36 - Driver Seat Module
2. Coding
3. Long coding
4. Long coding helper (VCDS)
5. Byte 2
6. Tick "Bit 5"
7. Byte 6
8. Tick "Bit 1"
9. Exit
10. Do It

Go to your control modules, Select module 06 (I think this is passenger side)
Select long Coding
If it shows a 0/1 at the top of the screen select 1 so you are in Byte Bit mode, if it does not then you are already in Byte Bit mode.
Screen will now show Byte 00 top left
Select the Byte and in the popup box type 2
Screen will now show Byte 02
Go to Bit 5 and tick, please note if somebody has entered a coding description you can find Bit 5 as its the 6th Tick box down (First tick is Bit 0,1,2 etc)
Then hit the green tick box to save it.
Select the Byte again and this time type in 6
Then from the new screen tick bit 1 (this will be the second Bit if its labeled)
Again Tick the Green tick box to save.

Repeat on Module 36 - Driver side

Deleted Deleted Member Posts: 0	Seat Symmetry + Passenger Seat Control Sept 1, 2017 11:35:33 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by Deleted on Sept 1, 2017 11:35:33 GMT Windy I have put up some details on the long coding that can be found here obdeleven.proboards.com/thread/102/long-coding nothing to do with this query but just to try and help understand long coding.

mmessick New Member Posts: 2	Seat Symmetry + Passenger Seat Control Sept 1, 2017 13:37:53 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by mmessick on Sept 1, 2017 13:37:53 GMT Yes, with no problem

acac
New Member

Posts: 1

Seat Symmetry + Passenger Seat Control Dec 11, 2017 18:57:29 GMT

Quote

Post by acac on Dec 11, 2017 18:57:29 GMT

Passenger Seat Module (06) seems to be missing on my OBDEleven - for 2018 Q5 MKII. Anybody else experiencing this? Was able to code the Drivers side, but cant find Passenger settings anywhere, so not able to move passenger seat from driver's side.

gscrazy New Member Posts: 2	Seat Symmetry + Passenger Seat Control May 28, 2020 4:10:29 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by gscrazy on May 28, 2020 4:10:29 GMT I have a 2018 Q7 and my passenger seat control unit is not in the obd11 app either. did you ever figure this out?

andreirdu New Member Posts: 2	Seat Symmetry + Passenger Seat Control May 24, 2022 20:11:14 GMT via mobile Quote Select Post Deselect Post Link to Post Back to Top Post by andreirdu on May 24, 2022 20:11:14 GMT Any news with the module 06? I can not find it on my q5 FY Thankyou.

jacksontouran Junior Member Posts: 91	Seat Symmetry + Passenger Seat Control Aug 28, 2023 3:54:22 GMT Quote Select Post Deselect Post Link to Post Back to Top Post by jacksontouran on Aug 28, 2023 3:54:22 GMT do you have passenger side seat memory?

derpandabear: Hi everyone, please check out my thread on the Summertime setting in OBDEleven: forum.obdeleven.com/thread/28144/summertime-setting-mk8-golf-gti Nov 10, 2024 19:42:57 GMT

ivankoterlyn: Seat Alhambra2015 I tried to unlock Full Link with one click. But the program did not unlock, but the money was withdrawn Nov 11, 2024 18:54:25 GMT

georgegianna: Recover Your Lost Coins with Paradox Recovery Wizard

I just wanted to express my heartfelt gratitude for your incredible help in recovering my lost funds. Your expertise and dedication have truly made a difference, and I’m so thankful for the support you’ Nov 15, 2024 19:31:32 GMT