|
Post by golfwagen2000 on Jul 16, 2023 0:28:34 GMT
Hi guys ! I retrofited golf mk7.5 full led headlights on my golf mk7 GTE.i followed some guy in another forum who done the whole conversion. I have installed module 4B and got 2 headlights and installed module 29 , 39 , D6 , D7 and after flashing them many times i have got them to work but there is no turn signal and no DRL strips working and module 29 and 39 is showing fault code C119F00 High beam variant, implausible. I want to mention also that i have replaced my BCM to a facelift BCM ( 5Q0 937 084 CF).
Does any one know what is the problem ?
|
|
|
Post by dv52 (Australia) on Jul 16, 2023 23:21:33 GMT
@golfwagon2000: Hi.
Clearly this is a non trivial project with an absolutely huge range of possible causes for any number of faulty steps and incompatibility problems in the exercise.
I'm sure that you are intimately aware of each step taken in the process (including part numbers for the new equipment and for new wiring looms, dataset version numbers for flashed modules and coding changes) - but it's going to be impossible to even make a semi-informed guess about this problem with the scant information in your post.
With absolutely no offense intended - this is a simple matter of the size of the project being grossly underestimated by the data in the back-story!!
Don
|
|