|
|
Post by kubinf on Jul 12, 2017 15:31:56 GMT
Hi,
somehow I can't anymore make changes to Adaptation in control unit 5F and when I try to go to Coding I get error message saying "Ups something when wrong, try again". I tried to clear the cache and app data, but nothing helps. Do you have any ideas?
Thank you
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 12, 2017 16:43:53 GMT
kubinf have you tried running a scan to see if any errors are showing. I presume all the other control units are working ok, have you checked your history just to make sure nothing changed (although I have no idea what you could change to disable the control unit) I would contact support obdeleven.proboards.com/thread/1877/contact-app-support-team who hopefully will have seen this before and be able to advise. Last question have you installed any new kit in the car. |
|
|
|
Post by jojolepirate on Oct 6, 2017 7:06:18 GMT
Just clear obdeleven's data and cache in android's Settings app. This will rebuild obdeleven's corrupted databases. Worked for me!
|
|
|
|
Post by mrwhite on Dec 20, 2017 5:53:06 GMT
I have the same „error“ after adding a rear camera to my Ateca. I‘m not able to switch into the long coding options in unit 5F. Any solution so far? Just clear the cache? Or do I need to do something else in order to secure that my new camera can be coded/activated in unit 5F? Thanks in advance!
|
|
|
|
Post by theoldboy on Dec 20, 2017 8:11:16 GMT
Clear cache first on OBD11 first then on Bluetooth secondly if it still not working.
|
|
|
|
Post by aldogambardella1989 on Sept 13, 2019 17:27:59 GMT
Hi everyone, I have a problem with obd 11, I don't understand why I can't find the menu 5f anymore, among the selected menus it is checked but then in the screen to enter it I didn't even try to uncheck it and then put it back but nothing .
the chance was canceled but no change
Thanks
|
|
