kreis
New Member
Posts: 20
|
Post by kreis on Jun 27, 2023 18:36:42 GMT
|
|
|
Post by dv52 (Australia) on Jun 28, 2023 1:40:26 GMT
Post-up pictures of Leuchte2SL VLB10 - please
Don
|
|
kreis
New Member
Posts: 20
|
Post by kreis on Jun 28, 2023 9:00:08 GMT
Thx Don ![](https://i.ibb.co/6g7YMwv/20230628-105924-COLLAGE.jpg)
|
|
|
Post by dv52 (Australia) on Jun 28, 2023 20:21:59 GMT
hmm......... maybe try this:
Leuchte2SL VLB10 and Leuchte3SL VRB21 - Lichtfunktion G > Innenlicht
- Dimmwert GH > 100
It really depends on the type of DRL behavior - you might need to also add this:
Leuchte4TFL LB4 and Leuchte5 TFL RB32 - Lichtfunktion G > Innenlicht
- Dimmwert GH > 127
Don
|
|
kreis
New Member
Posts: 20
|
Post by kreis on Jun 29, 2023 20:35:30 GMT
It works, only with both mod active. I have led DRL without Led pack; may i ask you why i had to modify both and why with different dimmwert value?
Thx a lot Andrea
|
|
|
Post by dv52 (Australia) on Jun 30, 2023 1:25:22 GMT
kreis : well done!! hmm.........so, you want me to disclose one of the deeply hidden mysteries of Leuchte-programming? I'm not sure that I can do that and still remain the founding (and only) member of SOOLP (Secret Order of Leuchte Programmers)!! OK - but ONLY if you promise not to tell anyone else:
As I said, it really depends on the type of lamps in the DRL - not ALL LEDs are created equal, even for OEM headlight assemblies!! So generally VW provide 2 x separate facilities (both physically and digitally) for LED based DRLs. This doesn't happen in some 3rd party headlight fittings. I'm not exactly sure why this occurs on OEM fittings - but I suspect that it's driven by production economics on the car assembly line!
Anyhow, on OEM fittings, the DRL lamp is fed by a separate wire for its power-supply and the lighting signal (which contains the lamp's PWM information and the ON/OFF status).
This is why 2 x Leuchte-sets are needed !!
Don
|
|
kreis
New Member
Posts: 20
|
Post by kreis on Jun 30, 2023 11:12:32 GMT
I'll do my best Thx a lot Don
|
|
kreis
New Member
Posts: 20
|
Post by kreis on Oct 11, 2023 10:24:54 GMT
Hi, i have to resume this thread cause i have an issue.. i tried to change the intensity (dimmwert of only leuche 2 and 3) of fake ch lh but nothing change. It changes only if i increase or decrease the brightness of "lichtfuncion a2 and a3 tagfarlicht"
|
|
kreis
New Member
Posts: 20
|
Post by kreis on Oct 11, 2023 20:42:54 GMT
Ok, i figured out and now it's all fine. Thx anyway
|
|