rpm
New Member
Posts: 7
|
Post by rpm on Jun 27, 2023 15:44:56 GMT
|
|
rpm
New Member
Posts: 7
|
Post by rpm on Jan 1, 2024 13:35:42 GMT
for those who are interested, i finaly code my towbar Control unit 19 (Gateway) [SFD: yes] Adjust installation list and add control unit with the number 69 (trailer). Coding: Trailer_hitch: Trailer hitch (manually removable) Coding: Rear_view_mode_trailer_hitch: installed Control unit 01
Coding: Byte 5 Bit 4 activate Control unit 09
Adjustments: Vernetzung / Anhaengeranschlussgeraet => installed Control unit 13
Coding: Control_module_for_towing_sensor => installed (Byte 1 Bit 7) Control unit 6C
Coding: equipment_ahk => installed (Byte 02 Bit 0) Control unit A5
Coding: AAG => coded (Byte 5 Bit 4) Control unit 76 Coding : Trailer => Trailer device can be removed manualy you may have to code other control unit depending on you equipement : lane change assistant :Control unit 3C Coding: ECU for draw bar => with_ECU_draw_bar (Byte 00 Bit 5) Chassis control :
Control unit 74 : Coding : Trailer => installed Electric trunk :Control unit 6D : Coding : Trailer => installed I read that ajustment have to be done in control unit 03 : Trailer stabilization => active but i don't find this ajustment in my car.   when the trailer socket is plugged in, there is a warning message. It's normal and the emergency rear brake is off.  |
|
frurider57
New Member
Speaks French, German and English
Posts: 3
|
Post by frurider57 on Feb 19, 2024 19:01:12 GMT
Hello,
Is that an original electric rotating hitch or a removable Towbar ?
Witch harness did you use for it ?
Thank you
|
|
|
|
Post by martial18 on May 4, 2024 13:04:46 GMT
Hello, rpm, Please, do you know what is the configuration : Control unit 01, byte5 bit4 ? I haven't found this information. Thanks you in advance! |
|
