|
|
Post by clintosity on Jun 6, 2023 10:31:46 GMT
Just wondering if anyone is able to assist. I disabled my stop start years ago on my golf mk7 by changing the temperature in obdeleven so it was above the threshold and I have a feeling it has something to do with my heater not working. I'm trying to find where I changed it to disable it. I've looked in module 19 and adaptions but can't find it. I might have done it in long coding but not too sure. Anyone know where this could have been done?
Cheers
|
|
|
|
Post by dv52 (Australia) on Jun 6, 2023 21:47:43 GMT
The 2 x channels for the SS tweak are indeed in the Gateway module @ address hex19 - like this: - EM_start_stop_requirement_ambient_temperature-Maximum_temperature
- EM_start_stop_requirement_ambient_temperature-Minimum_temperature
However, your "feeling it has something to do with my heater not working" is greatly exaggerated (IMO, of course). The temperature in the adaptation channels refers to the engine temperature and the channel doesn't modify any control mechanism in the coolant system. These channels simply hold threshold values which the SS system uses to compare with the measured engine temperature!!
So, my suggestion is that you manage the faulty heater as a completely separate exercise.
I'm not sure why you can't find the temperature channels in your hex19 module - perhaps you actually used the "voltage method" for the SS tweak? Maybe search the hex19 module instead for: - Start/stop start voltage limit
If this channel is in your module, the factory setting should be 7.6 - if it's value is not the default setting, the "voltage method" was used for the SS tweak.
Don
|
|
