|
|
Post by vodafone on May 3, 2023 22:20:17 GMT
Hello,
is it possible to light up the fog lights when the headlight flasher is activated?
Is there a coding option for this?
|
|
|
|
Post by djmartzian on May 4, 2023 8:47:53 GMT
Hello,
If you are looking for the Flash to Pass feature, here is the coding that works on my SK NX:
- Select Central Electric 09
- Select Adaptation
- Select LEUCHTE 12 NL L B45
- Select Lichtfunktion D 12
- Set to Lichthupe
- Select Dimmwert DEF 12
- Set to 100 (Original)
- Select LEUCHTE 13 NL R B5
- Select Lichtfunktion D 13
- Set to Lichthupe
- Select Dimmwert DEF 13
- Set to 100(Original)
- Select LEUCHTE 16 BLK SL B42_C31
- Select Lichtfunktion C 16
- Set to Lichthupe
- Select Dimmwert ABC 16
- Set to 127
- Select LEUCHTE 17 BLK_SR B4_A61
- Select Lichtfunktion C 17
- Set to Lichthupe
- Select Dimmwert ABC 17
- Set to 127
Good luck!
|
|
|
|
Post by vodafone on May 4, 2023 13:25:03 GMT
Thank you. I will test it and report if it works.
|
|
|
|
Post by vodafone on Sept 14, 2023 10:43:22 GMT
Sorry for the late feedback.
I have made all the adaptions here and was successfully written them into the control unit.
However, no change can be detected.
The fog lights do not light up when the headlight flasher is activated.
|
|
|
|
Post by vodafone on Sept 20, 2023 7:35:44 GMT
Correction.
Can confirm the funtionality now. :-)
Probably had to wait for the bus rest (Busruhe) first.
|
|
