|
Post by panky1978 on May 3, 2023 16:16:05 GMT
Hi, I'm new to the forum. I have a 2019 skoda scala, and I just installed a virtual cockpit, everything is perfect in terms of coding, except for the information from the radio to the cockpit and the information from the mobile phone to the cockpit, it puts me in the virtual cockpit which is not There is audio and telephone information at the moment, my radio is bolero, any solution Thank you so much.
Sorry my english
|
|
|
Post by stefflimitless on May 3, 2023 20:55:17 GMT
5F:
Function configuration car—>Dashboard connection—>Bap over CAN an IP
Dashboard display configuration—> Coverart, Stationart, Call Picture, Dynamic icon—>BAP
Erhernet configuration—>Ethernet activation branch 1&4–>Master
17: Long coding: Audio—>Yes Telephone—>Yes Telephone2 Bap—>Yes Radio List—>Station Name or Frequency SDS Bap—>Yes
That’s my settings, maybe it will help. Btw, i have Amundsen
|
|
|
Post by panky1978 on May 3, 2023 21:23:42 GMT
Thank you very much, I will try these days and I will tell you the result
|
|
|
Post by panky1978 on May 9, 2023 23:50:46 GMT
Hi good, that coding did not work for me and when I connected ethernet 1 and 4 in master I got an ethernet communication error.
I need a complete backup of someone who mounts virtual cockpit plus radio bolero as standard to compare my data. Let's see if we are lucky
|
|
nikos1
Closed beta tester
Posts: 63
|
Post by nikos1 on Nov 3, 2023 22:01:53 GMT
Hello , I have done the same retrofit with you.On a kamiq my2021 I replaced normal cluster to cockpit. I had the same problem as you with volume and phone.... So I have run cable from cockpit pin 4-5 to media player bolero on pin 11(4)-12(5) on a green connector that I bought because it was missing. After that volume,radio stations and phone appears on cockpit.
|
|