|
|
Post by chriz1 on Apr 13, 2023 14:59:41 GMT
Anyone able to help with these coding options seen in this video at 10.04 mins as shown in video..
I'm looking to get the menu to adjust the steering resistance (sensitivity ) of the touch steering
|
|
C4NB!Z
Junior Member
Posts: 84
|
Post by C4NB!Z on Apr 13, 2023 20:52:55 GMT
No Video?
|
|
|
|
Post by chriz1 on Apr 15, 2023 18:44:25 GMT
Sorry!
|
|
|
|
Post by newty on Apr 16, 2023 6:22:25 GMT
Yes. Should be A5, Hc_Warn_Intensity -> Setting over Menu.
My last find was that it does not change anything in the behavior and also gets reset every ignition cycle. So this looks like there is no function behind it, just something prepared in the user interface.
The descriptions also do not point that this controls the laneassist/travel assist intervention strength and does not change the sensitivity of the hand on detection
|
|
|
|
Post by kimi17147 on Apr 16, 2023 13:58:24 GMT
Since you are the best resource on here I am wanting to change a couple of things.
1. Add shift lights to the GTI like the Golf R has.
2. Enable matrix headlights on US cars? I know that it can be done on autobahn GTI’s and the R
|
|
|
|
Post by newty on Apr 17, 2023 11:20:54 GMT
1) sounds like a more complicated thing, most likely attached to special pr code. Will need some coding in 4B and special datasets various control units (and recent software all over the car)
2) no idea what is inside NAR headlights, sorry!
|
|
|
|
Post by mintfotog on May 9, 2023 3:32:42 GMT
Since you are the best resource on here I am wanting to change a couple of things. 1. Add shift lights to the GTI like the Golf R has. 2. Enable matrix headlights on US cars? I know that it can be done on autobahn GTI’s and the R Nice to see my video getting posted around haha. Okay, so if you have an Autobahn or R this can be done but not through OBD11. It requires an activation. Plus, a bunch of coding. I offer it on my website acmtechnik.com However, I have an SE. I actually got the Auto High Beams activated along with the Clubsport drive modes and a couple of extra front assist features such as Swerve Support and Oncoming veh. Braking when turning. After this I activated the Matrix. The way to do this on an SE is a SWaP code and very expensive. Most wouldn’t spend the money on it. I only did because since I offer the activation service I have to be able to test it on my own vehicle. |
|
