|
|
Post by autobahnproven on Jun 11, 2017 4:50:26 GMT
Would like to raise and lower the windows with the remote on my MkV GTI built October 2005. There is no OBD Eleven app for this. A step by step how-to would be appreciated. Thanks in advance.
|
|
|
|
Post by J.Ro on Jun 13, 2017 17:19:34 GMT
Dosen't a LONG press on the lock/unlock buttons already do this? It does on my 1T touran. I have since coded it to action an automatic close without the buttons needing to be long pressed.
Check out the coding options on another VW OBD site for the answer
|
|
|
|
Post by Dan on Jul 7, 2017 0:17:46 GMT
I have a 2008 GTI and am looking for the same help. I found some info on another site but it wasn't with the OBD eleven interface and I don't want to mess anything up..lol. Hopefully someone will provide a step by step guide.
|
|
|
|
Post by feetishes on May 27, 2018 3:13:28 GMT
|
|
|
|
Post by vdubbmx on Aug 15, 2018 1:07:35 GMT
I did the steps to do this with my 06 mk5 but its seem to work and I held the lock/unlock button for a LONG! Time but still did seem to work I can put screen shot of needed but just see if anyone knew off the dome lol
THANKS IN ADVANCE!!
|
|
jsb
New Member
Posts: 5 
|
Post by jsb on Jul 1, 2019 18:31:32 GMT
Hi Feetishes
Thanks for posting the screenshots --but i've got a question.
As I see your screen shots essentially you changed Byte 07 from value 1B to 3F, and Byte 08 was changed to? or(from?)value 09.
Could you clarify what value Byte 08 should be?
Thanks
|
|
|
|
Post by adiwob on Jul 2, 2019 10:06:44 GMT
Hi Feetishes Thanks for posting the screenshots --but i've got a question. As I see your screen shots essentially you changed Byte 07 from value 1B to 3F, and Byte 08 was changed to? or(from?)value 09. Could you clarify what value Byte 08 should be? Thanks You don't have to put exactly the same hex on your car because could be different, why don't you simply just check the bits to have the correct value for your car? |
|
