Post by ak7even on Feb 19, 2023 10:22:20 GMT
Hi all,
Need some help over here. I recently bought and retrofitted the MK7.5 taillights (with the start up animation) on my MK7 Golf R. The lights seem to work perfectly fine with all functions, but the animation on the right outer taillight doesn’t do the animation, it just turns on as it would normally. The animation works with all of the other taillights as it should, so I’m not sure what the issue is.
When I scanned the car, it through the following code, which I’m assuming is related to this issue:
OBDeleven vehicle history log
Date: 2023-02-19 10:11:36
Car: Golf R
Year: 2016
Body type: D5 Hatchback
Engine: CJXC kW ( hp) l
Mileage: 100334 km
---------------------------------------------------------------
09 Central Electrics
System description: BCM MQBAB H
Software number: 5Q0937084CL
Software version: 0175
Hardware number: 5Q0937084AN
Hardware version: H24
Faults:
B133C15 - Right brake/tail lamp bulb
Open circuit/short circuit to B+
Intermittent
Priority - 1
Malfunction frequency counter - 1
Unlearning counter - 37
Terminal 15 status - Off
Terminal 50 status - Off
Voltage - 12.7 V
Outside air temperature - 14.0 °C
Status Bremslichtschalter (HW) - Off
Status Bremslichtschalter (CAN) - Off
Off - not activated
Parking light - operated
Automatic high beam assist - not activated
Low beam - not activated
Parking light left - operated
Parking light right - operated
Letzte Weckursache/ Werte [00;2E] - Pin A32 Heckdeckel Softtouch TasterPin
CAN-Bus aktiv - On
I have cross checked my adaptations to the stock settings for the taillights and they all match. I have cross checked for all taillight units (Leuchte20, 21, 23 and 24). I previously had the urban jokes coded in but obviously reverted it back to normal before fitting these, so I’m not sure what the issue can be.
Please can someone help on how to get the animation working on the right outer taillight too?
Thanks!
Need some help over here. I recently bought and retrofitted the MK7.5 taillights (with the start up animation) on my MK7 Golf R. The lights seem to work perfectly fine with all functions, but the animation on the right outer taillight doesn’t do the animation, it just turns on as it would normally. The animation works with all of the other taillights as it should, so I’m not sure what the issue is.
When I scanned the car, it through the following code, which I’m assuming is related to this issue:
OBDeleven vehicle history log
Date: 2023-02-19 10:11:36
Car: Golf R
Year: 2016
Body type: D5 Hatchback
Engine: CJXC kW ( hp) l
Mileage: 100334 km
---------------------------------------------------------------
09 Central Electrics
System description: BCM MQBAB H
Software number: 5Q0937084CL
Software version: 0175
Hardware number: 5Q0937084AN
Hardware version: H24
Faults:
B133C15 - Right brake/tail lamp bulb
Open circuit/short circuit to B+
Intermittent
Priority - 1
Malfunction frequency counter - 1
Unlearning counter - 37
Terminal 15 status - Off
Terminal 50 status - Off
Voltage - 12.7 V
Outside air temperature - 14.0 °C
Status Bremslichtschalter (HW) - Off
Status Bremslichtschalter (CAN) - Off
Off - not activated
Parking light - operated
Automatic high beam assist - not activated
Low beam - not activated
Parking light left - operated
Parking light right - operated
Letzte Weckursache/ Werte [00;2E] - Pin A32 Heckdeckel Softtouch TasterPin
CAN-Bus aktiv - On
I have cross checked my adaptations to the stock settings for the taillights and they all match. I have cross checked for all taillight units (Leuchte20, 21, 23 and 24). I previously had the urban jokes coded in but obviously reverted it back to normal before fitting these, so I’m not sure what the issue can be.
Please can someone help on how to get the animation working on the right outer taillight too?
Thanks!
