|
Post by dmortimer3001 on Feb 17, 2023 23:19:02 GMT
Anyone with the side parking sensors late 2022/23 vehicles with update software 3.0 onwards. I’ve been trying to find the function of the memory parking function that is suppose to be with in the software. The only thing I can find in park assist module long cording is Trained park assist??
|
|
karlm
New Member
Posts: 4
|
Post by karlm on Feb 21, 2023 16:53:14 GMT
You will find tpa (trained parking assist) in modul A5 (Driver Assistance) long coding. In addition to that there is the option in the modules 8125 and 5F to set Trained parking in the BAP adaption values. Till now I was not able to change the coding of module 76. Changing the other modules didn’t show any difference in my case.
|
|
|
Post by dmortimer3001 on Feb 21, 2023 19:06:47 GMT
Thank you, yes I tried changing the coding but nothing either it just keeps reverting back to not installed.
|
|
|
Post by blistograd on Apr 19, 2023 9:15:26 GMT
need assistant camera 1EA980653 not 1EA980654
|
|
ID.3
Full Member
Posts: 210
|
Post by ID.3 on Apr 24, 2023 6:22:28 GMT
Are you talking about the windscreen camera?
|
|
|
Post by dmortimer3001 on Apr 25, 2023 0:28:06 GMT
Yes I believe he is, looking into that it’s the only difference between the id4/5 with the park assist+
|
|
|
Post by blistograd on May 20, 2023 16:24:42 GMT
I did it!!
|
|
|
Post by audidave on May 20, 2023 16:56:33 GMT
Great job, Did you have to fit camera 1EA980653
|
|
|
Post by generationgav on Jun 11, 2023 22:47:49 GMT
Yes - please tell us how you enabled this!
|
|
|
Post by blistograd on Jun 15, 2023 12:43:35 GMT
1EA980653
|
|
|
Post by generationgav on Jun 15, 2023 13:44:26 GMT
So you had to change the front camera then? Might be a bit too much for me...
|
|
|
Post by bsar01 on Jul 29, 2023 20:42:05 GMT
Did someone figure out if it is possible with the 1EA980654 camera or is the only option to install the 1EA980653 camera?
|
|
|
Post by id4boy on Dec 30, 2023 10:18:58 GMT
Can you please explain? Which parameters did you change? Did you change to the 43-camera or was it already on the car?
|
|
|
Post by mencey on Dec 30, 2023 14:16:36 GMT
In addition to the side sensors, the ECU 1EA919300 + 12 ultrasonic sensors 1ED919275B since the sensors brought by cars without park assist plus are also different + the new camera that has more memory to store the trained parking lots. This is the necessary hardware to be able to re-equip the park assist plus. Can you share the full encoding?
|
|
|
Post by mencey on Jan 2, 2024 9:18:25 GMT
I'm going to install the complete kit because my car is 20121 and does not bring the side sensors, this is the photo of the kit I need the camera with more memory, I need the new camera that costs about 80 €. I have also bought the side assist kit and the Area view 360 and I will install them little by little. the ID operating system is already in its final phase 3.X in older models and will not change much.
|
|
|
Post by mencey on Jan 4, 2024 12:30:35 GMT
Does anyone know where to get the pin out of the control units? I am not referring to the wiring diagram, I mean the PIN OUT for example of the ECU 1EA 919 300.
|
|
|
Post by dmortimer3001 on Jan 13, 2024 5:31:05 GMT
You can go onto vw Erwin and register free 1 hour with printing rights is about €8 it used to have the pin outs for all the modules but I don’t know how the repair manuals are set out now. erwin.volkswagen.de/erwin/showHome.do
|
|
|
Post by dmortimer3001 on Jan 13, 2024 5:35:32 GMT
Mency so since I have the side sensors and the right park assist control module I just need the camera to get it working.
|
|
|
Post by dmortimer3001 on Jan 26, 2024 22:09:18 GMT
Got my 653E camera today? Connected just to see coding. No coding and it’s coming up with component protection? I presume this can only be coded high end software like geko. I knew the calibration would need doing and will be getting someone in to do that but seems strange that I cannot do any basic coding on it at all. When I change any coding it just loops saying writing then unlocking.
|
|