|
|
Post by d4rrylke on Feb 6, 2023 10:07:07 GMT
Hello,
I'm wanting to change the speed of the turn signals when locking/unlocking and found it it can be changed in Module 09 -> Adaptation -> Acknowledgement signals. However, the following values I want to change do not exist for me:
- ZV-Blinken Hellzeit
- ZV-Blinken Dunkelzeit
- ZV-Blinken Abschluss Dunkelzeit
Is there a way to add these options to change the values?
My golf 7 is from 2013.
|
|
|
|
Post by dv52 (Australia) on Feb 6, 2023 22:08:04 GMT
d4rrylke: in your older style module, the ZV-Blinken channels were under the name "Dyn. turn signal modes". However, I'm not sure that you could change the turn-signal speed in these modules? Don
|
|
|
|
Post by d4rrylke on Feb 7, 2023 15:18:41 GMT
Thank you for your reply. Apparently on the facelift model, the value in milliseconds can be changed which represents the speed of the turn signal upon unlocking/locking the car. I was hoping it can be done on the pre-facelift model as well.
|
|
|
|
Post by dv52 (Australia) on Feb 7, 2023 21:39:18 GMT
d4rrylke : hmm.... I've just checked my MQB database and I suspect that your information is a tad incomplete (no offense intended) According to my data, the FULL complete channel names are: - Acknowledgement signals-ZV-Blinken_Abschluss_Dunkelzeit > 300 ms
- Acknowledgement signals-ZV-Blinken_Dunkelzeit > 300 ms
- Acknowledgement signals-ZV-Blinken_Hellzeit > 300 ms
So, clearly the "Parent" name of the 3 x channels is Acknowledgement signals (i.e. NOT "ZV-Blinken").
Older style central electrics modules also have channels with the Parent name "Acknowledgement signals" - however the particular 3 x channels in my list above are missing!!
Bottom line = it doesn't look good (alas)!!
Don
|
|
