|
|
Post by jantzu on Feb 3, 2023 14:35:01 GMT
Is it possible to code the ACC so that when you set the speed to e.g. +3 km/h after recognizing traffic signs, ACC always adjusts the speed to +3 km/h when a new traffic sign is recognized?
I have coded normal CC next to ACC, as well as "Overtaking right prevention", but this kind of function still interests me.
|
|
|
|
Post by newty on Feb 4, 2023 10:44:03 GMT
Sadly no.
We tried everything possible and can almost certainly say:
* A special FoD/Swap is needed for this, unobtainable
* This feature is not implemented at the moment
For older MQB cars this was possible, but even there it more looks like some leftovers from development which were never finalized
|
|
veton
New Member
MK8
Posts: 20
|
Post by veton on Feb 9, 2023 16:00:17 GMT
Help!
When I select acc on it says not available.
Is this not working for me or can it be activated?
Thank you
|
|
|
|
Post by HoseRodolfO on Mar 4, 2023 19:20:55 GMT
Hello
Yes it is possible. I successfully activated it in Passat B8 MY2023
STG13 -> LongCoding
Tempolimitassistent_CarMenu -> ACTIVATED
zul_RegelLabWeichnung_CarMenu -> Large
pACC_Learning Driver offset -> ACTIVATED
Enjoy!
Rgds!
|
|
|
|
Post by newty on Mar 4, 2023 19:34:32 GMT
Yeah. MQB, Conti 2Q0 ACC. Been there, done that.
Golf 8 is MQBw and has a Bosch 5WA. There is a special FeC for Offset. And my findings are that even with that FeC enabled, there is no function
|
|
veton
New Member
MK8
Posts: 20
|
Post by veton on Mar 4, 2023 22:02:54 GMT
So he can't?
Not to try
|
|
|
|
Post by newty on Mar 5, 2023 4:40:54 GMT
You can try to find these Codings.
They are just missing.
If you find them, give them a try - why not ;-)
|
|
alexa
New Member
Posts: 11
|
Post by alexa on Mar 24, 2023 8:32:02 GMT
If i understand right he is talking about ACC predictive control?
|
|
|
|
Post by newty on Mar 24, 2023 18:33:46 GMT
Nope. We are talking about offsets:
100km/h is detected and set. Car drives 100km/h.
Driver overrides to 110km/h. Car drives 110km/h.
70km/h is detected. Since the driver decided to go 10km/h, 80km/h is set.
Something you can code on MQBs, but not on MQBws
|
|
|
|
Post by MartiniB on Apr 22, 2023 13:36:07 GMT
STG13 -> LongCoding Tempolimitassistent_CarMenu -> ACTIVATED zul_RegelLabWeichnung_CarMenu -> Large pACC_Learning Driver offset -> ACTIVATED THANKS! activated this on Škoda Superb 2023 Mk3.FL haven't test it on the road yet, but GUI option Tolerance gives following picture and becomes locked after chose 'Medium'  other choices can be changed between each other without problems Control unit: 13 Adaptive Cruise Control
System description: ACC BOSCH MQB
Software number: 5Q0907572S
Software version: 0780
Hardware number: 3Q0907567B
Hardware version: H03
ODX name: EV_ACCBOSCHVW416
ODX version: 003015
Long coding:
new value: 32055FD25DFFC728979D812481400680000000000010000076
|
|
|
|
Post by HoseRodolfO on May 6, 2023 6:43:09 GMT
Good to know that it works for you In principle it looks like not fully prepared function. In my case it also works only when Tolerate selector is set to low. In other cases it just doesn't work or function just becomes unavailable. Also sometimes I have to provide Offset two times: Example: During driving of speed 50km/h - recognized from the map or TSR - I just change speed of ACC to 70km/h (Calculated Offset +20km/h) Then it works and i.e. in recognized 90km/h by TSR, ACC is setting to 110km/h. When I'm driving through the highway and TSR recognizes 100km/h it sets 120 km/h, but when speed limit is canceled it does not comes back to 140... There is need to add offset when the ACC is set to 100 km/h when TSR recognizes 120 After this action speed is coming back during further speed limits to approprieate offset +20 Above issue does not appear in the cities or just standard roads where speed limits are not higher than 100km/h I'm satisfied with this improvement because it's really useful to just set it +10 and be rather peaceful that Police will not react on such small speed violation  ![]()  |
|
|
|
Post by kschmelzer on Oct 10, 2023 15:02:04 GMT
Nope. We are talking about offsets: 100km/h is detected and set. Car drives 100km/h. Driver overrides to 110km/h. Car drives 110km/h. 70km/h is detected. Since the driver decided to go 10km/h, 80km/h is set. Something you can code on MQBs, but not on MQBws Is there still no way to do it in the new mk8? |
|
|
|
Post by newty on Oct 14, 2023 10:36:48 GMT
Nope. Showstoppers are still valid:
Function likely not implemented in Software
There is a FeC needed to allow that function
|
|
|
|
Post by mookistar on Nov 13, 2023 14:26:01 GMT
Hi, is this literally all you did? I have a 2020 Passat with 3Q0 radar and 2Q0 camera but activating the codings above does nothing. Do I need to make any changes elsewhere (rebooting Discover Pro didn't help)
Any ideas, as I find the pACC so aggressive when changing speed limits?
Thanks
Mike
|
|
bob76
New Member
Posts: 11
|
Post by bob76 on Nov 19, 2023 20:45:19 GMT
Slightly different request to the OP: What is the setting for getting ACC to automatically adjust the speed setting after it detects a new traffic sign? I have ACC on my Caddy but I have to change the required speed manually.
|
|
